Home

3% more discount if you pay with bank transfer - insert product in cart to get discount

Computer

Featured

Rotators

Complete telescopes

Optical tubes

Mounts

Focusers

Dovetail bars and rings

Various accessories

Gift card

Calibration

Observatory Stations

Radio astronomy

Photo accessories

Showing 1-343 of 343 item(s)

Spacers and curved blocks

PLUS 10mm spacers

PLLSPES10

$29.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

2 Reviews

When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 10mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...

View

New
Pack

FOR VERY LARGE TELESCOPES

ESATTO 7.5" LP focuser with ARCO 7" rotator

PLLEST75LPARCO7

Be the first to review this product

ESATTO 7.5" LP focuser with ARCO 7" rotator is the focusing rotator we designed even for the largest telescopes! This bundle (weight 13.5 kg) includes our most advanced motorized focuser and rotator designed for large professional telescopes, offering an ultra-low profile (90mm optical thickness), a massive 183mm free aperture, with extreme 0.08-micron...

View

Accessories for radio telescopes

Radio-over-Fiber kit for SPIDER 300A MarkII radio telescope

RoF-SPIDER-3

$8,665.00

Be the first to review this product

Radio-over-Fiber kit for SPIDER 300A MarkII radio telescope allows you to have fiber optic cable connecting the antenna to the H142-PRO radio astronomy receiver in the control room, instead of the standard coaxial cables. This way you remove the normal gain loss because of cable length and you improve even more performances of your SPIDER 300A MarkII...

View

Books

Book "Radio astronomy: Introduction to invisible sky"

RADIOBOOK-EN

$25.00

Be the first to review this product

Are you interested in radio astronomy? Do you want to know how do radio telescopes work? This book will allow you to discover the amazing world of the Universe that our eyes cannot see but that we can study with radio techniques. Author Filippo Bradaschia (co-founder of PrimaLuceLab) explains the different themes of this science in a simple and...

View

EAGLE

EAGLE6 computer for telescopes and astrophotography

EAGLE6

$1,295.00

Be the first to review this product

EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management,...

View

Radio telescopes for radio astronomy

SPIDER 230C compact radio telescope, kit without mount

SPIDER230C-KIT

Price starts at
$18,604.00

Be the first to review this product

SPIDER 230C is the compact radio telescope that opens the door for anyone to explore the fascinating world of radio astronomy with an affordable, turn-key solution. Designed to be powerful but portable and user-friendly, it bridges the gap between radio astronomy and amateur astronomy technologies. Built with innovation and our patented technology, the...

View

Pack

GIOTTO+ALTO bundles

GIOTTO 120 with ALTO-1 telescope cover motor

PLLGIOTTO120ALTO1

$770.00

Be the first to review this product

This bundle includes GIOTTO 120 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!

View

Spare parts

ARCO rotator port cable - 220mm long

PL3600421

$9.00

Be the first to review this product

The ARCO rotator port cable - 220mm long is included in the ARCO package but you can also order it as spare part if needed. This cable connects rotator port of ARCO to ESATTO or SESTO SENSO 2. Since this is the shorter cable provided within ARCO package, it's che cable we suggest to connect ARCO to ESATTO.

View

Spare parts

Set 3 locking screws for GIOTTO

PLLGIOTTOSCR

$12.00

Be the first to review this product

Set 3 locking screws for GIOTTO are already included in every GIOTTO box but you can also order them as spare part. These screws are used in order to fix GIOTTO smart flat field generator in front of your telescope.

View

Rotators

3" nosepiece for ARCO 3"

PL3600466

$53.00

Be the first to review this product

3" nosepiece for ARCO 3" allows you to connect rotator to focusers that come with 3" visual back and to control it through SESTO SENSO 2 installed on the same focuser.

View

Software

PLAY - Prima Luce AstrophotographY software

PLAY

Be the first to review this product

PLAY is the astrophotography software that allows you to record beautiful pictures of the night sky in the simplest way, with the telescope, mount and camera you prefer! Connect all your telescope devices to PLAY and start your exploration of the Universe: check the Planetarium sky chart to find astrophotography targets, visualise your field of view, and...

View

Spare parts

Red color bushing for SESTO SENSO 2

PL3600116A

$9.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This red color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 2.5mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.

View

Pack

ESATTO 3”

ESATTO 3" robotic focuser

PLLEST3-B

$945.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

ESATTO robotic focuser is also available in 3" version with 76.3mm free aperture, 25mm of draw tube travel, 8kg of payload capacity and an incredible resolution of 0,04 micron per step! The perfect solution for apochromatic refractors and Ritchey-Chretien or Cassegrain telescopes, and heavy imaging trains with large cameras and accessories like off axis...

View

Photographic adapters

T2-50,8mm photographic adapter

PL3304226

$24.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The T2-50,8mm photographic adapter connects to all cameras and accessories with female T2 (M42x0,75) thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 39mm free aperture so it does not create...

View

ECCO

ECCO2, environmental computerized controller for EAGLE

ECCO2

$195.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...

View

ARCO 3"

ARCO 3" camera rotator and field de-rotator

PLLARCO3

$1,295.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

ARCO 3" is the larger version of our ARC second resolution rOtator that, thanks to its incredible resolution of 1 arc second per step, is the most precise camera rotator and field de-rotator! The 3” version of ARCO has a thickness of only 23mm and a free aperture of 76.3mm. When used together with an equatorially mounted telescope, ARCO allows you to...

View

ARCO 2"

ARCO 2" camera rotator and field de-rotator

PLLARCO2

$695.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

ARCO 2" is the new low profile ARC second resolution rOtator that, thanks to its incredible resolution of 1 arc second per step, is the most precise camera rotator and field de-rotator! The 2” version of ARCO has a thickness of only 20mm and a free aperture of 50.9mm. When used together with an equatorially mounted telescope, ARCO allows you to rotate the...

View

ESATTO 4”

ESATTO 4" robotic focuser

PLLEST4

$1,395.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

ESATTO 4" is the large dimensions robotic focuser that we designed for observatory class telescopes or for astrographs that need for large free aperture, like the Takahashi FSQ-106. Compared to the smaller models, ESATTO 4" offers a larger free aperture of 102.2mm, a longer draw tube travel of 35mm and a higher payload capacity of 10 kg, always with the...

View

EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 3A port

PL1000042

$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like SkyWatcher EQ6, HEQ5 and EQ5,...

View

EAGLE-type power cables

1,0m Eagle power cable extension cord 3A-8A

PL1000053

$46.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

1,0m Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.

View

Dew heaters

Dew heater for 50mm diameter telescopes

PLLFAS50

$49.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 50mm diameter telescopes can be easily...

View

Guiding systems

Guide rings PLUS 80mm

PLLANGU80P

$65.00

Be the first to review this product

If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 80mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 60mm diameter refractors. Like all the other elements of the PLUS...

View

Pack

Side by side plates

Side by side Vixen plate 240mm PLUS

PLLPDVIX240P_

$195.00

Be the first to review this product

The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...

View

Spacers and curved blocks

PLUS 20mm spacers

PLLSPES20

$42.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 20mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...

View

Other accessories for mounts

Counterweight PLUS 1Kg

PLL-CONTRPLUS

$35.00

Be the first to review this product

This 1 Kg counterweight allow easier balance of the optical tubes . It can be installed both side, on the front or rear optics of any instrument. Dimensions: 65x60mm, 35mm thickness.

View

Dovetail bars

Vixen style dovetail plate 90mm PLUS

PLLVIX90P

$34.00

Be the first to review this product

The Vixen style dovetail plate 90mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 90mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...

View

Support rings

80mm PLUS support rings

PLLANSU80E

$159.00

Be the first to review this product

The 80mm PLUS support rings can be used with various brands telescopes (for example refractors 60-70mm in diameter) with 80mm diameter tube. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...

View

Dovetail clamps

Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLP

$68.00

4 Reviews

The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance). Our dovetail clamps, unlike the common ones, offer...

View

Accessories for radio telescopes

Radio-over-Fiber kit for SPIDER 500A MarkII radio telescope

RoF-SPIDER-5

$8,665.00

Be the first to review this product

Radio-over-Fiber kit for SPIDER 500A MarkII radio telescope allows you to have fiber optic cable connecting the antenna to the H142-PRO radio astronomy receiver in the control room, instead of the standard coaxial cables. This way you remove the normal gain loss because of cable length and you improve even more performances of your SPIDER 500A MarkII...

View

EAGLE

EAGLE6 S computer for telescopes and astrophotography

EAGLE6S

$1,795.00

Be the first to review this product

EAGLE6 S is the more powerful version of the EAGLE6. With its i3 processor, 8 GB of fast RAM, a larger SSD (256 GB), and the addition of Thunderbolt interface (providing even higher-speed connectivity, up to 40 Gbps, for devices like high-speed storage if extra space is needed) to USB-C ports, EAGLE6 S delivers greater performance while maintaining low...

View

ECCO

ECCO-NTC adapter for Dew Heater Rings

PL1000061

$115.00

Be the first to review this product

ECCO-NTC is the adapter that allows you to use a Celestron Dew Heater Ring with the ECCO2 environmental computerized controller. Dew Heater Rings differ from standard dew heater straps, as they utilize an NTC thermistor to measure temperature of SC or aplanatic SC telescopes corrector plate without the need for an external temperature probe. ECCO-NTC is...

View

Radio telescopes for radio astronomy

SPIDER 300A MarkII advanced radio telescope

SPIDER300A

Price starts at
$46,598.00

Be the first to review this product

SPIDER 300A MarkII is the most advanced 3 meter diameter radio telescope for 1420 MHz radio astronomy designed to let schools, universities, scientific museums and other educational institutes own a powerful and affordable instrument! Designed with advanced features usually found only in large professional radio telescopes, and by including all you need...

View

Pack

Portable telescopes

SkyWatcher EVOLUX 82 ED portable telescope with AZ-EQ5 and EAGLE

TSKEVOLUX82AZEQ5EAGLE

Be the first to review this product

SkyWatcher EVOLUX 82 ED with AZ-EQ5 and EAGLE is a powerful but still portable telescope for deep-sky astrophotography that can be used in equatorial or in alt-azimuth mode: it comes with EAGLE for remote control and power, SESTO SENSO 2 robotic focusing motor, ARCO camera rotator and field de-rotator, GIOTTO smart flat field generator and ALTO telescope...

View

Spare parts

Cable Locking Clip (CLC) for GIOTTO

PLLGIOTTOLOCK

$6.00

Be the first to review this product

This Cable Locking Clip (CLC) for GIOTTO allows you to lock to GIOTTO body the USB and power cables that connects GIOTTO to ALTO. This is already provided within ALTO package, but you can also order this as spare part if needed.

View

Spare parts

ARCO rotator port cable - 690mm long

PL3600422

$12.00

Be the first to review this product

The ARCO rotator port cable - 690mm long is included in the ARCO package but you can also order it as spare part if needed. This cable connects rotator port of ARCO to ESATTO or SESTO SENSO 2. Since this is the longer cable provided within ARCO package, it's che cable we suggest to connect ARCO to SESTO SENSO 2.

View

Pack

GIOTTO+ALTO bundles

GIOTTO 150 with ALTO-1 telescope cover motor

PLLGIOTTO150ALTO1

$810.00

Be the first to review this product

This bundle includes GIOTTO 150 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!

View

ALTO telescope cover motor

ALTO-2 telescope cover motor for GIOTTO up to 320mm

PLLALTO2

Be the first to review this product

ALTO-2 is the telescope cover motor we designed to let you use GIOTTO for sizes up to 320mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows...

View

GIOTTO flat field generators

GIOTTO 150 Smart Flat Field Generator

PLLGIOTTO150

$315.00

Be the first to review this product

GIOTTO 150 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 150mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

View

Observatory Stations

DUAL-COMPACT Observatory Station with 3m dome

PLLDUALCMP1

Price starts at
$69,000.00

Be the first to review this product

DUAL-COMPACT is the Observatory Station with dome and dual telescope designed by PrimaLuceLab to provide an affordable solution for remote space exploration and astronomy education. It’s composed by an Alt-Az mount installed on a heavy pier, supporting 2 optical telescopes in parallel, one with a short focal length and one with a long focal length, with...

View

Pack

ESATTO 3,5" LP

ESATTO 3,5" LP focuser with ARCO 3" rotator

PLLEST35LPARCO3

$2,585.00

Be the first to review this product

This bundle includes the ESATTO 3,5" LP low profile focuser, the ARCO 3" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 58mm of thickness and 76.3mm of free aperture.

View

Pack

Tripods and piers

C82 pier for concrete base

C82-C-B

$695.00

Be the first to review this product

When you want to install a telescope under a dome, the pier is preferable since not only it provides very good stability but it also needs for less space and it prevents the telescope installed on the mount touches the tripod. Using the pier, you can safely use your instrument! This pier can be used with optional adapters for EQ6 / EQ6-R / AZ-EQ6 / CGEM...

View

Pack

ESATTO 4”

ESATTO 4" focuser with ARCO 3" rotator

PLLEST4ARCO3

$2,835.00

Be the first to review this product

This bundle includes the ESATTO 4" focuser, the ARCO 3" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 93.0mm of thickness and 76.3mm of free aperture.

View

Pack

ESATTO 3”

ESATTO 3" focuser with ARCO 3" rotator

PLLEST3ARCO3

$2,335.00

Be the first to review this product

This bundle includes the ESATTO 3" focuser, the ARCO 3" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 86.5mm of thickness and 76.3mm of free aperture.

View

Pack

ESATTO 2"

ESATTO 2" focuser with ARCO 2" rotator

PLLEST2ARCO2

$1,419.00

Be the first to review this product

This bundle includes the ESATTO 2" focuser, the ARCO 2" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 90.5mm of thickness and 50.9mm of free aperture.

View

Spare parts

Black color bushing for SESTO SENSO 2

PL3600116B

$9.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This black color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 2.8mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.

View

Rotators

Adapter ESATTO 3" for ARCO 2"

PL3600416

$69.00

Be the first to review this product

Adapter ESATTO 3" for ARCO 2" allows you to connect the rotator to ESATTO 3" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.

View

ARCO 3"

M63x1 adapter for ARCO 3"

PL3600465

$69.00

Be the first to review this product

M63x1 adapter for ARCO 3" allows you to connect rotator to focusers or correctors that come with 63x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. Optical thickness of PL3600465 adapter is 2mm.

View

Photographic adapters

M48-50,8mm photographic adapter

PL3304826

$24.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The M48-50,8mm photographic adapter connects to all cameras and accessories with female M48x0,75 thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 44mm free aperture so it does not create any...

View

SESTO SENSO

SESTO SENSO 2 26mm adapter

SESTOSENSO-AD26II

$76.00

Be the first to review this product

This 26mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 26mm diameter shaft, like focusers from Explorer Scientific (or other focusers with a 26mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers...

View

ARCO 2"

2" nosepiece for ARCO 2"

PL3600413

$49.00

Be the first to review this product

2" nosepiece for ARCO 2" allows you to connect rotator to focusers that come with 2" visual back and to control it through SESTO SENSO 2 installed on the same focuser.

View

Pack

APO refractors

SkyWatcher EVOLUX 62 ED apochromatic refractor with SESTO SENSO

SK-EVOLUX62SS

Be the first to review this product

SkyWatcher EVOLUX 62 ED is an apochromatic refractor, ED doublet 62mm f/6.4, lightweight and portable that comes also with 0.9x reducer/flattener that reduces focal length to 360mm (f/5.8) and manual rotator. Thanks to SESTO SENSO 2 and PLUS rings that avoid any flexure, it's perfect for wide field astrophotography of deep-sky object!

View

Pack

Astrographs

Celestron RASA Rowe-Ackermann Schmidt 8" astrograph with SESTO SENSO

CE91073SS

Be the first to review this product

Celestron RASA Rowe-Ackermann Schmidt 8" with SESTO SENSO is the compact astrograph 203mm f2 that allows you to make wide field astrophotography of deep-sky objects in a short time! Thanks to SESTO SENSO you can control the focus, also remotely.

View

Pack

Ritchey-Chretien

GSO Ritchey-Chretien 152mm f/9 with metal tube and SESTO SENSO

GSRC6MSS

Be the first to review this product

GSO Ritchey-Chretien 152mm f/9 with metal tube and SESTO SENSO is the most compact and lightweight Ritchey-Chretien telescope, perfect if you're looking for a portable instrument, even for travel! Thanks to SESTO SENSO you can focus without touching the focuser, both thanks to the included virtual keyboard or with a computer like the EAGLE.

View

Pack

Newton reflectors

SkyWatcher Newton 150/750 f5 with SESTO SENSO

SKBK150750-DSFSS_

$728.00

Be the first to review this product

SkyWatcher Newton 150/750 f5 with SESTO SENSO is the most compact and lightweight 150mm diameter f/5 telescope that, thanks to the most advanced focusing motor, is great both for visual use (you can focus also without a computer by using the included Virtual HandPad) and for astrophotography (by connecting SESTO SENSO 2 to the EAGLE or to a Windows...

View

-$30.00

SESTO SENSO

SESTO SENSO 2 robotic focusing motor

SESTOSENSOII

$269.00 $299.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

8 Reviews

SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows® computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don’t want to focus using a computer, you can connect wirelessly from any...

View

EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector - 115cm for 8A port

PL1000043

$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like QHYCCD, ATIK, ZWO, QSI cooled cameras,...

View

EAGLE-type power cables

0,5m Eagle power cable extension cord

PL1000054

$45.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

0,5m Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.

View

Support rings

85mm PLUS support rings

PLLANSU85P

$215.00

Be the first to review this product

85mm PLUS support rings can be used with any brands telescopes (for example refractors 70mm-80mm diameter) with tube approximately 85mm in diameter. Adding these rings, you can broad the possibilities of use of this telescope as it becomes possible, for example, the installation also on other mounts or to install telescopes in parallel. Like all the other...

View

Dew heaters

Dew heater for 60mm diameter telescopes

PLLFAS60

$55.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Pack

Side by side plates

Side by side Vixen plate 350mm PLUS

PLLPDVIX350P_

$215.00

Be the first to review this product

View

Spacers and curved blocks

PLUS 30mm spacers

PLLSPES30

$47.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others. That's why we created the PLUS 30mm spacers that can be fixed between two mechanical elements (such as a plate and the support rings), keeping the functionality of the...

View

Dovetail clamps

Big Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLPB

$145.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

1 Reviews

The big dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or give the possibility to assemble the Losmandy...

View

Guiding systems

Guide rings PLUS 115mm

PLLANGU115P

$105.00

Be the first to review this product

If you want to install a guide telescope in parallel to the main one, guide rings offer the simplest and cheapest solution to make this. The Guide rings PLUS 115mm offer a high build quality and all the features useful for this application, allowing you to install guide telescopes such as 80mm diameter refractors. Like all the other elements of the PLUS...

View

Dovetail bars

Vixen style dovetail plate 140mm PLUS

PLLVIX140P

$39.00

Be the first to review this product

The Vixen style dovetail plate 140mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 140mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...

View

GIOTTO flat field generators

GIOTTO for Origin, Smart Flat Field Generator

PLLGIOTTORG6

$325.00

Be the first to review this product

GIOTTO for Origin is an intelligent flat field generator specifically designed for Celestron Origin telescopes, enabling precise flat field calibration with the smart telescope. This ensures that if you rotate the Origin camera to better frame your target, or when new cameras become available in the future, you can easily capture a new flat-frame image....

View

Accessories for radio telescopes

NSGen-II noise generator for absolute calibration for SPIDER300

NSGEN-II-3

$3,220.00

Be the first to review this product

NSGen radio telescope noise generator for absolute calibration is designed for SPIDERs and it can be used to calculate the flux in Jy of a radio source or sky area, by compensating atmospheric attenuation or any gain loss because of different factors (for example, antenna deformation because of its weight). The NSGen noise generator is installed on the...

View

EAGLE

EAGLE6 PRO computer for telescopes and astrophotography

EAGLE6PRO

$2,295.00

Be the first to review this product

EAGLE6 PRO is the computer for telescopes and astrophotography that provides top-class performance thanks to fast i5 processor, Industrial Grade 16 GB fast DDR4 RAM memory, large and fast Industrial Grade 512 GB SSD drive (NVMe), Thunderbolt 4 connectivity for even higher speed, up to 40 Gbps, for devices like external storage memories. All in a...

View

Radio telescopes for radio astronomy

SPIDER 500A MarkII professional radio telescope

SPIDER500A

Price starts at
$104,918.00

Be the first to review this product

SPIDER 500A MarkII is the 5 meter diameter professional radio telescope designed to make 1420 MHz level radio astronomy accessible to everyone: universities, science institutes and museums or space agencies. It offers a large 5 meter diameter antenna to detect weaker signals with a better resolution, the large GS-400II tracking system that provides very...

View

Pack

ESATTO 2" LP

ESATTO 2" LP focuser with ARCO 2" rotator

PLLEST2LPARCO2

$1,665.00

Be the first to review this product

This bundle includes the ESATTO 2" LP low profile focuser, the ARCO 2" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 54.2mm of thickness and 50.9mm of free aperture.

View

Pack

GIOTTO+ALTO bundles

GIOTTO 185 with ALTO-1 telescope cover motor

PLLGIOTTO185ALTO1

$860.00

Be the first to review this product

This bundle includes GIOTTO 185 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!

View

Spare parts

Cable Locking Clip (CLC) for ALTO

PLLALTOLOCK

$8.00

Be the first to review this product

This Cable Locking Clip (CLC) for ALTO allows you to lock to ALTO body the USB and power cables that connects GIOTTO to ALTO. This is already provided within ALTO package, but you can also order this as spare part if needed.

View

ALTO telescope cover motor

ALTO-3 telescope cover motor for GIOTTO larger than 320mm

PLLALTO3

$895.00

Be the first to review this product

ALTO-3 is the telescope cover motor we designed to let you use GIOTTO larger than 320mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows...

View

Observatory Stations

ASTRO-RES Observatory station with 3m dome

PLLASTRORES1

Price starts at
$75,000.00

Be the first to review this product

ASTRO-RES Observatory station is the complete astronomical observatory designed for astronomy research and education: thanks to our long experience with optical telescopes, we can support astronomy institutes all around the world. ASTRO-RES Observatory Station is remotely controlled and powered thanks to the EAGLE, and it comes with ESATTO focuser, ARCO...

View

Spare parts

Blue color bushing for SESTO SENSO 2

PL3600116C

$9.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This blue color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 2.4mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.

View

Pack

Tripods and piers

C120 pier for concrete base

C120-C-B

$1,345.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

C120 pier is the perfect solution to install even a large telescope in an astronomical observatory. The C120 pier has a high load capacity (150 kg) and, compared to a standard tripod, it provides high stability and needs for less space. A pier also prevent the telescope to touch the tripod legs during movements! This pier is available also with different...

View

ESATTO 4”

M110 35mm extension tube for ESATTO 4"

PL3600325

$105.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The M110 35mm extension tube can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube has 35mm thickness, it's made up of aluminum, black anodized and it has a M110 female on the camera side this way you can connect all the ESATTO 4" camera adapters.

View

ARCO 3"

M86x1 adapter for ARCO 3"

PL3600463

$69.00

Be the first to review this product

M86x1 adapter for ARCO 3" allows you to connect rotator to focusers or correctors that come with 86x1 female thread and to control it through SESTO SENSO 2 installed on the focuser.

View

ARCO 2"

M48x0.75 female adapter for ARCO 2"

PL3600424

$49.00

Be the first to review this product

M48x0.75 female adapter for ARCO 2" allows you to connect rotator to focusers or correctors that come with M48x0.75 male thread and to control it through SESTO SENSO 2 installed on the focuser. PL3600424 adapter adds 6.7mm to ARCO 2” optical thickness so the total optical thickness (ARCO 2" + PL3600424) becomes 26.7mm.

View

Photographic adapters

M48 female to T2 male adapter

PL3304842

$22.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

M48 female to T2 male adapter allows you to connect accessories with M48 thread (48x0.75 male) to those with T2 thread (42x0,75 female). In fact sometimes the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very thin...

View

ESATTO 2"

M56 15mm extension tube for ESATTO 2" and ARCO 2"

PL3600286

$45.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The M56 15mm extension tube can be directly threaded to the ESATTO 2" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M56 extension tube has 15mm thickness, it's made up of aluminum, black anodized and it has a M56 female on the camera side this way you can connect all the ESATTO 2" camera adapters.

View

ESATTO 3”

M81 25mm extension tube for ESATTO 3" and ARCO 3"

PL3600285

$59.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm thickness, it's made up of aluminum, black anodized and it has a M81 female on the camera side this way you can connect all the ESATTO 3" camera adapters.

View

SESTO SENSO

SESTO SENSO 2 33mm adapter

SESTOSENSO-AD33II

$76.00

Be the first to review this product

This 33mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 33mm diameter shaft, like 2,5" and 3" FeatherTouch focusers (or other focusers with a 33mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers...

View

Pack

Ritchey-Chretien

GSO Ritchey-Chretien 203mm f/8, metal tube with ESATTO 2"

GSRC8MEST2_

Be the first to review this product

GSO 203mm f/8 Ritchey-Chretien with metal tube is a great compact telescope for long exposure astrophotography and it uses and ESATTO 2" robotic microfocuser to perfectly focus also heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.

View

EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 3A port

PL1000044

$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like the ESATTO focusers and the SESTO...

View

ECCO

Guide scope support for ECCO

ECCOSUP

$79.00

Be the first to review this product

ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).

View

Dew heaters

Dew heater for 80mm diameter telescopes

PLLFAS80

$59.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

EAGLE-type power cables

EAGLE type connector for 3A power OUT ports

PL1000036

$15.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

EAGLE type connector for 3A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.

View

Guiding systems

60mm CompactGuide scope with PLUS 80mm guide rings

PLLCG60

$185.00

1 Reviews

60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be used as a...

View

Pack

Side by side plates

Side by side Losmandy plate 240mm PLUS

PLLPDLOS240P_

$210.00

Be the first to review this product

View

Dovetail clamps

Maxi Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLPM

$198.00

Be the first to review this product

The Maxi dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or to install it on the mounts instead of the original...

View

Spacers and curved blocks

"PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and...

PLLSAG925

$69.00

1 Reviews

If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm...

View

Dovetail bars

Vixen style dovetail plate 240mm PLUS

PLLVIX240P

$59.00

Be the first to review this product

The Vixen style dovetail plate 240mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 240mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...

View

Support rings

90mm PLUS support rings

PLLANSU90P

$225.00

1 Reviews

The 90mm PLUS support rings are designed for telescopes with tube approximately 90mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...

View

Accessories for radio telescopes

NSGen-II noise generator for absolute calibration for SPIDER500

NSGEN-II-5

$3,950.00

Be the first to review this product

View

EAGLE

EAGLE6 XTM computer for telescopes and astrophotography

EAGLE6XTM

$2,995.00

Be the first to review this product

EAGLE6 XTM is our most powerful computer ever for telescopes and astrophotography with blazing-fast i7 processor, Industrial Grade 32 GB fast DDR4 RAM memory, huge Industrial Grade 2TB SSD drive (NVMe) and Thunderbolt 4 connectivity for even higher speed, up to 40 Gbps, for devices like external storage memories. It's the perfect solution even for the...

View

Observatory Stations

DUAL-PRO Observatory Station with 3m dome

PLLDUALPRO1

Price starts at
$139,000.00

Be the first to review this product

DUAL-PRO is the Observatory Station with dome and dual telescope designed by PrimaLuceLab to provide a professional level but compact solution that can be used for many applications: remote space exploration, space situational awareness, astrophotography and astronomy education/outreach. DUAL-PRO includes a very high precision and load capacity alt-az...

View

ESATTO 2" LP

2" visual back for ESATTO 2" LP

PL8410053

$95.00

Be the first to review this product

If you want to connect a camera with a 2" nosepiece to your ESATTO 2” LP, just connect the 2" visual back to the M60 thread of ESATTO 2” LP. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories. Optical thickness...

View

ALTO telescope cover motor

ALTO-3L telescope cover motor for GIOTTO 560mm

PLLALTO3L

$995.00

Be the first to review this product

ALTO-3L is the telescope cover motor we designed to let you use GIOTTO 560mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows computer that you...

View

ESATTO 4”

M110 10mm extension tube for ESATTO 4"

PL3600376

$105.00

Be the first to review this product

The M110 10mm extension tube can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube has 10mm thickness, it's made up of aluminum, black anodized and it has a M110 female on the camera side this way you can connect all the ESATTO 4" camera adapters.

View

ARCO 2"

M56x1 male adapter for ARCO 2"

PL3600427

$49.00

Be the first to review this product

M56x1 male adapter for ARCO 2" allows you to connect rotator to focusers that come with M56x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. PL3600427 adapter adds 1mm to ARCO 2” optical thickness so the total optical thickness (ARCO 2" + PL3600427) becomes 21mm.

View

Pack

GIOTTO+ALTO bundles

GIOTTO 220 with ALTO-1 telescope cover motor

PLLGIOTTO220ALTO1

$930.00

Be the first to review this product

This bundle includes GIOTTO 220 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!

View

GIOTTO flat field generators

GIOTTO 185 Smart Flat Field Generator

PLLGIOTTO185

$365.00

Be the first to review this product

GIOTTO 185 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 185mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

View

ESATTO 3”

3" visual back for ESATTO 3" and ARCO 3"

PL8410010

$85.00

Be the first to review this product

If you want to connect a camera with a 3" nosepiece to your ESATTO 3" or ARCO 3", just connect the 3" visual back to the M81 thread of ESATTO 3" or ARCO 3" . This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories.

View

ESATTO 3,5" LP

3" visual back for ESATTO 3,5” LP

PL8410011

$95.00

Be the first to review this product

If you want to connect a camera with a 3" nosepiece to your ESATTO 3,5” LP, just connect the 3" visual back to the M98 thread of ESATTO 3,5” LP. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories. Optical...

View

Dovetail clamps

Observatory Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLPO

$395.00

Be the first to review this product

The Observatory dovetail clamp Vixen+Losmandy PLUS is designed to support heavy telescopes that come with Vixen or Losmandy style dovetail bar. The Observatory version of PLUS dovetail clamps is 280mm long and it comes with 4 locking blocks to safely lock even large telescopes. The Observatory Dovetail Clamp Vixen+Losmandy PLUS is provided with threaded...

View

Spare parts

Green color bushing for SESTO SENSO 2

PL3600116D

$9.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This green color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 3.5mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.

View

Pack

ESATTO 2"

ESATTO 2" robotic focuser

PLLEST2-B

$675.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

2 Reviews

ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2” version of the ESATTO 2" has 50.9mm free aperture, 15mm of draw tube travel, 5kg load capacity and...

View

ARCO 3"

Adapter ESATTO 3" for ARCO 3"

PL3600458

$95.00

Be the first to review this product

Adapter ESATTO 3" for ARCO 3" allows you to connect the rotator to ESATTO 3" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 3", thickness of rotator is 24.5mm.

View

Photographic adapters

M48 male to T2 female adapter

PL3304248

$22.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The M48 male to T2 female adapter allows you to connect accessories with M48 thread (48x0.75 female) to those with T2 thread (42x0,75 male). Sometimes in fact the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very...

View

Pack

APO refractors

SkyWatcher EVOLUX 82 ED apochromatic refractor with SESTO SENSO

SK-EVOLUX82SS

Be the first to review this product

SkyWatcher EVOLUX 82 ED is an apochromatic refractor, ED doublet 82mm f/6.4, powerful and compact, that comes also with 0.9x reducer/flattener that reduces focal length to 480mm (f/5.8) and manual rotator. Thanks to SESTO SENSO 2 focusing motor and PLUS rings that avoid any flexure, it's perfect for wide field astrophotography of deep-sky object!

View

Pack

Astrographs

Celestron Rowe-Ackermann Schmidt 11" astrograph with SESTO SENSO

CE91075SS

Be the first to review this product

Celestron RASA Rowe-Ackermann Schmidt 11" with SESTO SENSO is the powerful astrograph 280mm f2.2 that allows you to make wide field astrophotography of deep-sky objects in a short time! Thanks to SESTO SENSO you can control the focus, also remotely.

View

Pack

Newton reflectors

SkyWatcher Newton 200/1000 f5 with SESTO SENSO

SKBKP2001-DSFSS_

$819.00

Be the first to review this product

SkyWatcher Newton 200/1000 f5 with SESTO SENSO is 200mm f/5 telescope offering a large diameter and the SESTO SENSO 2 robotic focusing motor at a great price. It's the perfect solution if you're searching for a great instrument both for visual and photographic use.

View

SESTO SENSO

SESTO SENSO 2 37mm adapter

SESTOSENSO-AD37II

$85.00

Be the first to review this product

This 37mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 37mm diameter shaft, like 3,5" FeatherTouch and FSQ-130 (or other focusers with a 37mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers with...

View

Pack

Aplanatic Schmidt-Cassegrain

Celestron EdgeHD 8" with Losmandy bar and ESATTO 2" LP

CE91030-XLTEST2_

Be the first to review this product

Celestron EdgeHD 8" telescope with Losmandy bar is a compact aplanatic Schmidt-Cassegrain telescope 203mm f/10 that, thanks to the ESATTO 2" LP low profile focuser, becomes excellent for any application! It's perfect also for remote control since the ESATTO allows you to focus even with the primary mirror locked to eliminate image shift.

View

Pack

Schmidt-Cassegrain

Celestron C8-XLT with dovetail Vixen type and ESATTO 2"

CE91020-XLTEST2_

Be the first to review this product

Celestron C8-XLT with dovetail Vixen type, one of the most used telescopes in the world, is now more precise thanks to the ESATTO 2" robotic microfocuser that eliminates the image shift typical of Schmidt-Cassegrains! This telescope is 203mm in diameter (f/10) and it's compact, lightweight and easy to collimate.

View

ESATTO 2"

2" visual back for ESATTO 2" and ARCO 2"

PL8410001

$85.00

Be the first to review this product

If you want to use your telescope visually with ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect...

View

EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 8A port

PL1000045

$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like Moravian cooled cameras.

View

EAGLE-type power cables

EAGLE type connector for power IN and 5A or 8A power OUT ports

PL1000035

$15.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

EAGLE type connector for power IN and 5A or 8A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.

View

Pack

Side by side plates

Side by side Losmandy plate 240mm PLUS large dovetail clamps

PLLPDLOS240PL_

$364.00

Be the first to review this product

View

Dovetail bars

Vixen style dovetail plate 350mm PLUS

PLLVIX350P

$79.00

Be the first to review this product

The Vixen style dovetail plate 350mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen style dovetail plate is 350mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components...

View

Optical finders

DX finder base

PLLBACEDX

$29.00

Be the first to review this product

DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.

View

Dew heaters

Dew heater for 100mm diameter telescopes

PLLFAS100

$59.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Tripods and piers

Adapter EQ6 / AZ-EQ6 / CGEM for C82 pier for concrete base

C82-C-EQ6-FL

$235.00

Be the first to review this product

This adapter allows you to connect EQ6 / AZ-EQ6 / CGEM mounts to the C82 pier for concrete base.

View

Support rings

95mm PLUS support rings

PLLANSU95P

$235.00

2 Reviews

The support rings PLUS 95mm can be used with different brands telescopes with tube approximately 95mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ85, Takahashi FS-78, Takahashi FC-100DF and DL. Like all the other...

View

Accessories for radio telescopes

Mount-Over-Fiber kit for SPIDER MarkII and INTREPID

MoF

$1,660.00

Be the first to review this product

Mount-over-Fiber kit for SPIDER MarkII radio telescopes allows to remotely control the tracking system from very long distances by replacing the network cable with a dedicated optical fiber that can be up to 2km long.

View

ESATTO 3,5" LP

Adapter from M98 to M72 female for ESATTO 3,5” LP

PL3600385

$125.00

Be the first to review this product

Adapter from M98 to M72 female for ESATTO 3,5" LP allows you to connect any camera or accessory with M72 male thread. Just thread this adapter to the M98 thread of the ESATTO 3,5" LP draw tube. This adapter adds no optical thickness.

View

ESATTO 2" LP

Adapter ESATTO 2" LP for telescopes with SC thread

PL3600542

$95.00

Be the first to review this product

By adding this adapter, you can connect the ESATTO 2" LP low profile robotic focuser directly onto the back of SC telescopes. This adapter threads directly to the back SC thread of EdgeHD 8" and C8 telescopes. Optical thickness is 2.5mm.

View

ALTO telescope cover motor

ALTO-3L adapter for OS RiDK 400

PL3700141

$495.00

Be the first to review this product

This adapter allows you to connect ALTO-3L telescope cover motor to the front part of the OS RiDK 400 telescope.

View

Pack

GIOTTO+ALTO bundles

GIOTTO 255 with ALTO-2 telescope cover motor

PLLGIOTTO255ALTO2

$1,090.00

Be the first to review this product

This bundle includes GIOTTO 255 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!

View

GIOTTO flat field generators

GIOTTO 220 Smart Flat Field Generator

PLLGIOTTO220

$435.00

Be the first to review this product

GIOTTO 220 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 220mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

View

Spare parts

Grey color bushing for SESTO SENSO 2

PL3600116E

$9.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This grey color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 3.1mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.

View

Spare parts

WiFi antennas for EAGLE

PL3600087

$25.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

These WiFi antennas can be connected to the EAGLE control units, by using the sma connectors that are present on the EAGLE chassis. These antennas are included in the EAGLE's box and they provide 2 dBi gain. Compatible with all the EAGLE models, 2 antennas included in every set.

View

Observatory Stations

BINO-SSA Observatory Station with large FoV and 3m dome

PLLBINOSSA1

Price starts at
$149,000.00

Be the first to review this product

BINO-SSA is a turn-key and affordable Observatory Station with dual optical telescope that provide a large field of view for Space Situational Awareness (SSA) and Space Surveillance and Tracking (SST) activities like the study of space debris and its classification. In fact a modern use of optical telescopes is to create a network of optical systems with...

View

ARCO 3"

Adapter ESATTO 4" for ARCO 3"

PL3600459

$145.00

Be the first to review this product

Adapter ESATTO 4" for ARCO 3" allows you to connect the rotator to ESATTO 4" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 3", thickness of rotator is 24.5mm.

View

Photographic adapters

5mm T2 extension

PL3304205

$19.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

PrimaLuceLab T2 extensions are available in different lengths and they present on both sides of a T2 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

View

ARCO 2"

Adapter ESATTO 2" for ARCO 2"

PL3600412

$49.00

Be the first to review this product

Adapter ESATTO 2" for ARCO 2" allows you to connect the rotator to ESATTO 2" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.

View

Pack

Schmidt-Cassegrain

Celestron C8-XLT with dovetail Losmandy type and ESATTO 2"

CE91024-XLTEST2_

Be the first to review this product

Celestron C8-XLT with dovetail Losmandy type, one of the most used telescopes in the world, is now more precise thanks to the ESATTO 2" robotic microfocuser that eliminates the image shift typical of Schmidt-Cassegrains! This telescope is 203mm in diameter (f/10) and it's compact, lightweight and easy to collimate.

View

ESATTO 3”

2" visual back for ESATTO 3" and ARCO 3"

PL8410002

$85.00

Be the first to review this product

If you want to use your telescope visually with ESATTO 3" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 3" to the M81 thread of the focuser draw tube. This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a...

View

ESATTO 2"

Adapter ESATTO 2" for SkyWatcher/Orion ED80, ED100 and ED120

PL3600230

$145.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion ED80, ED100 or ED120 apochromatic refractors for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. By adding this adapter to ESATTO, your new focuser will have the same thickness of the standard one. Based on the camera and accessories...

View

EAGLE-type power cables

Eagle-compatible power cable for accessories with cigarette plug - 30cm - 8A

PL1000055

$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 8A) of the instrument they are designed for. On the other side they have the plug with...

View

Pack

Side by side plates

Side by side Losmandy plate 350mm PLUS

PLLPDLOS350P_

$225.00

Be the first to review this product

View

Pack

Dovetail clamps

Big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5

PLLMORVLPB-AZEQ5_

$186.00

Be the first to review this product

The big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5 allow to install on the Skywatcher AZ-EQ5 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the AZ-EQ5 type mount. Thus you will have a better connection than the original AZ-EQ5 offering greater stability and...

View

ECCO

Temperature sensor for ECCO, SESTO SENSO and ESATTO

SESTOSENSO-TEMP

$25.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...

View

Dew heaters

Dew heater for 120mm diameter telescopes

PLLFAS120

$65.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Tripods and piers

Adapter for EQ5 / HEQ5 / AZ-EQ5 for C82 pier for concrete base

C82-C-EQ5-FL

$235.00

Be the first to review this product

This adapter allows you to connect EQ5 / HEQ5 / AZ-EQ5 mounts to the C82 pier for concrete base.

View

Support rings

100mm PLUS support rings

PLLANSU100P

$245.00

Be the first to review this product

The 100mm PLUS support rings are designed to be used with Ø100mm tube refractor telescope (or other telescopes brands with tube approximately 100mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS...

View

Dovetail bars

Losmandy style dovetail plate 140mm PLUS

PLLLOS140P

$49.00

1 Reviews

The Losmandy style dovetail plate 140mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 140mm long and is useful for installing compact telescopes (as refractors up to 100mm in diameter) on mounts with Losmandy plate (as the SkyWatcher SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...

View

Books

Book "Explore the Universe through astrophotography: capturing pictures with telescopes...

BOOKEXPL2EN

$35.00

Be the first to review this product

Astrophotography offers a unique opportunity to explore the universe and capture the beauty of the cosmos through your telescope. Filippo Bradaschia, co-founder of PrimaLuceLab, wrote this book for all those who wish to discover how to transform their telescope into a instrument capable of revealing extraordinary details of galaxies, nebulae, and planets....

View

ESATTO 3,5" LP

Adapter from M98 to M54 with stop ring for ESATTO 3,5” LP

PL3600387

$125.00

Be the first to review this product

Adapter from M98 to M54 with stop ring for ESATTO 3,5" LP allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M98 thread of the ESATTO 3,5" LP draw tube. Thanks to the M54 stop ring for ESATTO 3,5" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

View

Accessories for radio telescopes

Wind sensor for SPIDER MarkII and INTREPID

WIND-S

$2,232.00

Be the first to review this product

Wind sensor for SPIDER MarkII radio telescopes allows to continuously read the wind speed for safety: this way, if the wind speed exceeds the safety speed, the antenna is automatically moved pointing the Zenith, in a safe position, thus reducing the wind load on the antenna.

View

ESATTO 2" LP

Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread

PL3600539

$95.00

Be the first to review this product

Adapter ESATTO 2” LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 2" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO 2" LP has an optical thickness of 32mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 112mm of backfocus for your camera and accessories, also...

View

Pack

GIOTTO+ALTO bundles

GIOTTO 285 with ALTO-2 telescope cover motor

PLLGIOTTO285ALTO2

$1,160.00

Be the first to review this product

This bundle includes GIOTTO 285 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!

View

ECCO

Guide rings support plate for ECCO

ECCOSUP-PL

$23.00

Be the first to review this product

The "Guide rings support plate for ECCO" allows you to install the "60mm CompactGuide scope with PLUS 80mm guide rings" (PLLCG60) on the ECCO on a standard Vixen style finder shoe. This way you can use the guide scope with an autoguide camera or also with an eyepiece as an optical finder.

View

GIOTTO flat field generators

GIOTTO 255 Smart Flat Field Generator

PLLGIOTTO255

$495.00

Be the first to review this product

GIOTTO 255 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 255mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

View

ESATTO 3”

40mm extension tube for ESATTO 3"

PL3600317

$125.00

Be the first to review this product

When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 40mm extension that can be installed between ESATTO 3" and the telescope tube. A precise dovetail...

View

Pack

ESATTO 3,5" LP

ESATTO 3,5" LP low profile robotic focuser

PLLEST35LP-B

$1,195.00

Be the first to review this product

ESATTO 3,5” LP is the most advanced yet affordable low profile robotic focuser specially designed for the most demanding astrophotography! At just 32mm of thickness, ESATTO 3,5” LP provides a large 90mm free aperture with 10mm of travel, impressive 10 kg of payload capacity and an astounding resolution of 0.01 microns per step! ESATTO 3,5” LP has been...

View

ARCO 3"

Adapter ESATTO 3,5” LP for ARCO 3"

PL3600467

$95.00

Be the first to review this product

Adapter ESATTO 3,5” LP for ARCO 3" allows you to connect the rotator to ESATTO 3,5" LP low profile focuser and control it through the special port on ESATTO. By adding this adapter (that has an optical thickness of 3mm) to ARCO 3", thickness of rotator becomes 26mm.

View

Spare parts

Yellow color bushing for SESTO SENSO 2

PL3600116F

$9.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This yellow color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 4.0mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.

View

Spare parts

GPS antenna for EAGLE4

PL3600088

$65.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This GPS antenna is included with every EAGLE4, EAGLE4 S and EAGLE4 PRO. This GPS antenna is not compatible with other and/or previous versions of the EAGLE control units.

View

Tripods and piers

EQ6 / EQ6-R / AZ-EQ6 adapter for C120 pier

C120-EQ6

$395.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This adapter allows you to install the EQ6 / EQ6-R / AZ-EQ6 mounts on the C120 pier.

View

ESATTO 4”

Adapter from M110 to M68 with stop ring for ESATTO 4"

PL3600312

$155.00

Be the first to review this product

Adapter from M110 to M68 with stop ring for ESATTO 4" allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M110 thread of the ESATTO 4" draw tube. Thanks to the M68 stop ring for ESATTO 4" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

Photographic adapters

7mm T2 extension

PL3304207

$19.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Pack

Ritchey-Chretien

GSO Ritchey-Chretien 203mm f/8 with carbon fiber tube and ESATTO 2"

GSRC8CEST2

Be the first to review this product

GSO Ritchey-Chretien 203mm f/8 with carbon fiber tube and ESATTO 2" is a great telescope for astrophotography also with heavy cameras and accessories thanks to the ESATTO 2" microfocuser! Low weight and compact dimensions make it easily portable.

View

Pack

Newton reflectors

SkyWatcher Newton 254/1200 f4,7 with SESTO SENSO

SKBKP25012-DUALSS_

Be the first to review this product

SkyWatcher Newton 254/1200 f4,7 with SESTO SENSO is is the large 254mm diameter telescope perfect also for deep-sky objects observations that, thanks to SESTO SENSO 2 motor, you can focus precisely and without vibrations. Fast focal ratio makes it great also for astrophotography.

View

Pack

Aplanatic Schmidt-Cassegrain

Celestron EdgeHD 9.25" with Losmandy bar and ESATTO 2"

CE91040-XLTEST2_

Be the first to review this product

Celestron EdgeHD 9.25" telescope with Losmandy bar is an aplanatic Schmidt-Cassegrain telescope 235mm f/10 that offers high performance, even better with the ESATTO 2" microfocuser! It's perfect also for remote control since the ESATTO allows you to focus even with the primary mirror locked to eliminate image shift.

View

ESATTO 2"

Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5

PL3600237

$165.00

Be the first to review this product

If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 250 f4 and f5 reflector for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you...

View

Support rings

105mm PLUS support rings

PLLANSU105P

$259.00

Be the first to review this product

The 105mm PLUS support rings are designed for acromatic and apochromatic telescope (or other telescopes brands with tube approximately 105mm diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these...

View

Dew heaters

Dew heater for 150mm diameter telescopes

PLLFAS150

$69.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Pack

Side by side plates

Side by side Losmandy plate 350mm PLUS large dovetail clamps

PLLPDLOS350PL_

$379.00

Be the first to review this product

View

Pack

Dovetail clamps

Big dovetail clamp Vixen+Losmandy PLUS for HEQ5

PLLMORVLPB-HEQ5_

$180.00

Be the first to review this product

The big dovetail clamp Vixen+Losmandy PLUS for HEQ5 allows you to install, on the Skywatcher HEQ5 mount, telescopes with Vixen and Losmandy dovetail bars. The HEQ5 mount can connect only Vixen type dovetail plates: with our big dovetail clamp Vixen+Losmandy PLUS for HEQ5 you can also connect the Losmandy type dovetail plates!

View

EAGLE-type power cables

Eagle-compatible power cable for accessories with cigarette plug - 30cm - 3A

PL1000019

$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 3A) of the instrument they are designed for. On the other side they have the plug with screw to...

View

Dovetail bars

Losmandy style dovetail plate 240mm PLUS

PLLLOS240P

$74.00

Be the first to review this product

The Losmandy style dovetail plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all...

View

Accessories for radio telescopes

RK19 rack for radio telescopes

RK19

$4,407.00

Be the first to review this product

RK19 is the rack for radio telescope that is designed to allow you install all the Radio2Space receivers, antenna control units and accessories that fit in a 19″ rack. RK19 has 24 units, it comes with a Power Distribution Unit (PDU) to let you connect (with remote on/off) up to 8 devices and 4 fans with temperature sensor to keep control on your devices...

View

Spare parts

EAGLE EYE lens cap

PL3600099

$3.00

Be the first to review this product

EAGLE EYE lens cap protects lens of EYE sensor when not in use.

View

ESATTO 2" LP

Adapter from M60 to M48 with stop ring for ESATTO 2” LP

PL3600545

$125.00

Be the first to review this product

Adapter from M60 to M48 with stop ring for ESATTO 2" LP allows you to connect any camera or accessory with M48 female thread. Just thread this adapter to the M60 thread of the ESATTO 2" LP draw tube. Thanks to the M48 stop ring for ESATTO 2" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

View

Pack

GIOTTO+ALTO bundles

GIOTTO 320 with ALTO-2 telescope cover motor

PLLGIOTTO320ALTO2

$1,390.00

Be the first to review this product

This bundle includes GIOTTO 320 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!

View

GIOTTO flat field generators

GIOTTO 120 Smart Flat Field Generator

PLLGIOTTO120

$275.00

Be the first to review this product

GIOTTO 120 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 120mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

View

Spare parts

Flexible bushing for SESTO SENSO 2

PL3600119

$19.00

Be the first to review this product

This flexible bushing connects the SESTO SENSO 2 motor to one of the red, black, blue, green, grey or yellow bushings for different focusers. This flexible bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This flexible bushing is not compatible with SESTO SENSO first generation.

View

GIOTTO flat field generators

GIOTTO 285 Smart Flat Field Generator

PLLGIOTTO285

$565.00

Be the first to review this product

GIOTTO 285 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 285mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

View

ARCO 3"

M65x1 adapter for ARCO 3"

PL3600468

$69.00

Be the first to review this product

M65x1 adapter for ARCO 3" allows you to connect rotator to focusers or correctors that come with 65x1 female thread and to control it through SESTO SENSO 2 installed on the focuser. Optical thickness of this adapter is 3.5mm.

View

ESATTO 3,5" LP

Adapter from M98 to M68 with stop ring for ESATTO 3,5” LP

PL3600363

$125.00

Be the first to review this product

Adapter from M98 to M68 with stop ring for ESATTO 3,5" LP allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M98 thread of the ESATTO 3,5" LP draw tube. Thanks to the M68 stop ring for ESATTO 3,5" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

View

Pack

Astrographs

Officina Stellare Veloce RH200 f3 athermal with ESATTO 3,5" LP

VELRH200AT-B

Be the first to review this product

Officina Stellare Veloce RH 200 (Riccardi-Honders) athermal astrograph offers a fast f/3 focal ratio combined with a large corrected field. Veloce in Italian means fast, to indicate its primary vocation: to be a great astrograph capable of stunning performance. Officina Stellare Veloce RH 200 has 200mm of clear aperture and a focal length of 600mm. Its...

View

ARCO 2"

Adapter ESATTO 4" for ARCO 2"

PL3600423

$89.00

Be the first to review this product

Adapter ESATTO 4" for ARCO 2" allows you to connect the rotator to ESATTO 4" microfocuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 21mm.

View

ESATTO 4”

Adapter from M110 to M98 with stop ring for ESATTO 4"

PL3600322

$195.00

Be the first to review this product

Adapter from M110 to M98 with stop ring for ESATTO 4" allows you to connect any camera or accessory with M98 female thread. Just thread this adapter to the M110 thread of the ESATTO 4" draw tube. Thanks to the M98 stop ring for ESATTO 4" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

Tripods and piers

EQ8 adapter for C120 pier

C120-EQ8

$375.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This adapter allows you to install the EQ8 and EQ8-R mounts on the C120 pier.

View

Photographic adapters

9mm T2 extension

PL3304209

$24.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

ESATTO 3”

65mm extension tube for ESATTO 3"

PL3600284

$138.00

Be the first to review this product

When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a micrometric focuser. For this reason we have designed this 65mm extension that can be installed between ESATTO 3" and the telescope tube. A precise dovetail...

View

ESATTO 2"

Adapter ESATTO 2" for SkyWatcher/Orion Newton 200 f4 and f5

PL3600229

$165.00

Be the first to review this product

If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 200 f4 and f5 reflectors for astrophotography, this adapter allows you to connect ESATTO 2" to these telescopes. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you...

View

Dew heaters

Dew heater for 180mm diameter telescopes

PLLFAS180

$75.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Pack

Side by side plates

Side by side Losmandy plate 495mm PLUS maxi dovetail clamps

PLLPDLOS495PM_

$505.00

Be the first to review this product

View

Pack

Dovetail clamps

Big Dovetail Clamp Vixen+Losmandy PLUS for EQ6

PLLMORVLPB-EQ6_

$190.00

Be the first to review this product

The big dovetail clamp Vixen+Losmandy PLUS for EQ6 allow to install on the Skywatcher EQ6 or N-EQ6 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the EQ6 type mount. Thus you will have a better connection than the original EQ6 or N-EQ6 offering greater stability...

View

Dovetail bars

Losmandy style dovetail plate 350mm PLUS

PLLLOS350P

$89.00

Be the first to review this product

The Losmandy style dovetail plate 350mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 350mm long and is useful for installing medium dimensions telescopes (such as refractors up to 120mm and Newton up to 250mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the...

View

EAGLE-type power cables

Eagle-compatible power cable for SBIG STT and STF CCD camera - 115cm 8A

PL1000018

$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The Eagle control unit can directly power supply SBIG STT and STF CCD camera. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

View

Support rings

115mm PLUS support rings

PLLANSU115P

$269.00

Be the first to review this product

The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen...

View

Accessories for radio telescopes

CMP-19 computer for radio telescopes

CMP-19

$3,034.00

Be the first to review this product

CMP-19 is the Windows 10 Pro computer to be installed on a standard 19″ rack and it’s the best solution to install RadioUniversePRO software and remotely control SPIDER radio telescopes. CMP-19 has the same form factor of all the other SPIDER instruments that can be installed on a rack.

View

ESATTO 2" LP

Adapter from M60 to M54 with stop ring for ESATTO 2” LP

PL3600547

$125.00

Be the first to review this product

Adapter from M60 to M54 with stop ring for ESATTO 2" LP allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M60 thread of the ESATTO 2" LP draw tube. Thanks to the M54 stop ring for ESATTO 2" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

View

ARCO 2"

Adapter ESATTO 2" LP for ARCO 2"

PL3600538

$95.00

Be the first to review this product

Adapter ESATTO 2" LP for ARCO 2" allows you to connect the rotator to ESATTO 2" LP robotic focuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 22mm.

View

Spare parts

Black color bushing long for SESTO SENSO 2 adapters

PL3600117

$16.00

Be the first to review this product

Black color bushing long is usually included in 33 or 37mm adapters that allow to connect SESTO SENSO 2 to focusers with shafts larger than 25mm. If you upgraded from SESTO SENSO first generation to SESTO SENSO 2 and you also have one of the first generation adapters, you can just order the "Black color bushing long for SESTO SENSO 2 adapters" and connect...

View

Pack

Advanced telescopes

Celestron EdgeHD 9.25" advanced telescope with AZ-EQ6 and EAGLE

TCE91040AZEQ6EAGLE

Be the first to review this product

Celestron EdgeHD 9.25" advanced telescope with SkyWatcher AZ-EQ6 computerized mount that can be used in equatorial or in alt-azimuth mode, EAGLE to remotely control and power, ESATTO robotic focuser, ARCO camera rotator and field de-rotator, GIOTTO smart flat field generator and ALTO telescope cover motor: a powerful but still compact telescope for long...

View

Pack

GIOTTO+ALTO bundles

GIOTTO 430 with ALTO-3 telescope cover motor

PLLGIOTTO430ALTO3

$1,870.00

Be the first to review this product

This bundle includes GIOTTO 430 Smart Flat Field Generator and ALTO-3 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!

View

ARCO 3"

Adapter ESATTO 4" for ARCO 3", only for FSQ106

PL3600469

$145.00

Be the first to review this product

In order to prevent the ARCO 3" rotator to touch the internal field flattener of FSQ-106 telescope, we designed this special version of adapter that allows you to connect the ARCO 3" rotator to ESATTO 4" focuser, when installed on the FSQ-106. This adapter optical thickness is 10,5mm so, by adding it to ARCO 3", rotator optical thickness becomes 33,5mm....

View

GIOTTO flat field generators

GIOTTO 320 Smart Flat Field Generator

PLLGIOTTO320

$795.00

Be the first to review this product

GIOTTO 320 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 320mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

View

ALTO telescope cover motor

ALTO-1 telescope cover motor for GIOTTO up to 220mm

PLLALTO1

$495.00

Be the first to review this product

ALTO-1 is the telescope cover motor we designed to let you use GIOTTO for sizes up to 220mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows...

View

ESATTO 3,5" LP

Adapter ESATTO 3,5" LP for telescopes with SC thread

PL3600366

$95.00

Be the first to review this product

By adding this adapter, you can connect the ESATTO 3,5" LP low profile robotic focuser directly onto the back of SC telescopes. Optical thickness of this adapter is just 10mm.

View

EAGLE-type power cables

Eagle-compatible power cable for SkyWatcher AZ-EQ6 and AZ-EQ5 mounts - 115cm 3A

PL1000026

$45.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 3A plug with screw to prevent being disconnected accidentally...

View

Tripods and piers

Paramount MX adapter for C120 pier

C120-PMX

$375.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This adapter allows you to install the Paramount MX mount on the C120 pier.

View

ESATTO 2"

Adapter ESATTO 2" for Takahashi FS-60Q

PL3600255

$145.00

Be the first to review this product

If you are searching for the most precise motorized focuser for Takahashi FS-60Q, this adapter allows you to connect ESATTO 2" to this telescope. Optical thickness is 5mm. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your camera.

View

Photographic adapters

5mm M48 extension

PL3304805

$29.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

PrimaLuceLab M48 extensions are available in different lengths and they present on both sides of a M48 thread (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), these extensions offer an external knurling for a better grip (very useful for example when screwing or unscrewing). Thanks to...

View

ESATTO 4”

Adapter from M110 to M92 female for ESATTO 4"

PL3600316

$155.00

Be the first to review this product

Adapter from M110 to M92 female for ESATTO 4" converts M110x1 thread of the ESATTO 4" draw tube into a M92x1 female thread that is the same of the Takahashi original focuser. This way you can connect to ESATTO 4" the Takahashi photographic adapters.

View

Pack

Aplanatic Schmidt-Cassegrain

Celestron EdgeHD 11" with Losmandy bar and ESATTO 2"

CE91050-XLTEST2

Be the first to review this product

Celestron EdgeHD 11" telescope with Losmandy bar is a powerful aplanatic Schmidt-Cassegrain telescope 280mm f/10 that is still portable and you can install it in not too large mounts. Thanks to the ESATTO 2" microfocuser it has no image shift and it's perfect also for remote control since you can focus even with the primary mirror locked.

View

Pack

Newton reflectors

SkyWatcher Newton QUATTRO 200/800 f4 with ESATTO 2"

SKP2008IWP-FETS2_

Be the first to review this product

SkyWatcher Newton QUATTRO 200/800 f4 with ESATTO 2" is the 200mm f/4 telescope perfect for astrophotography, also with heavy cameras and accessories thanks to the ESATTO 2" microfocuser! Reduced weight and dimensions make it perfect for the use with not too large mounts.

View

Pack

APO refractors

SkyWatcher EVOSTAR 80 ED apochromatic refractor with SESTO SENSO

SKBKED80SS_

Be the first to review this product

SkyWatcher EVOSTAR 80 ED with SESTO SENSO and PLUS rings is a great apochromatic refractor, one of the most used telescopes in the world! Thanks to the most advanced focusing motor and to the PLUS rings that avoid any flexure, the Skywatcher EVOSTAR 80 ED is even better!

View

Pack

Ritchey-Chretien

GSO Ritchey-Chretien 254mm f/8, metal tube with ESATTO 3"

GSRC10MEST3_

Be the first to review this product

GSO 254mm f/8 Ritchey-Chretien with metal tube and ESATTO 3" robotic microfocuser is the perfect telescope for long exposure astrophotography also with heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.

View

Pack

Schmidt-Cassegrain

Celestron C9.25-XLT with dovetail Vixen type and ESATTO 2"

CE91025-XLTEST2_

Be the first to review this product

Celestron C9.25-XLT with dovetail Vixen type, thanks to the particular optical design, is perfect for high resolution: even better with the ESATTO 2" robotic microfocuser which eliminates image shift and allows you to focus the telescope with extreme precision, even remotely.

View

Dew heaters

Dew heater for 200mm diameter telescopes

PLLFAS200

$89.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Support rings

125mm PLUS support rings

PLLANSU125P

$280.00

1 Reviews

The support rings PLUS 125mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 125mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ106ED, Takahashi...

View

Dovetail bars

Losmandy style dovetail plate 495mm PLUS

PLLLOS495P

$109.00

1 Reviews

The Losmandy style dovetail plate 495mm PLUS is designed to let you install your telescopes on mounts with this connection. This dovetail plate is 495mm long and is useful for installing large dimensions telescopes (such as Newton up to 300mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all the elements of the PLUS...

View

ESATTO 2" LP

Adapter from M60 to T2 with stop ring for ESATTO 2” LP

PL3600543

$125.00

Be the first to review this product

Adapter from M60 to T2 with stop ring for ESATTO 2" LP allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M60 thread of the ESATTO 2" LP draw tube. Thanks to the T2 stop ring for ESATTO 2" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the...

View

Pack

ESATTO 2" LP

ESATTO 2" LP low profile robotic focuser

PLLEST2LP-B

$875.00

Be the first to review this product

ESATTO 2” LP is the most compact low profile robotic focuser specially designed for telescopes with low backfocus and it can fit also the Celestron EdgeHD 8"! At just 32mm of thickness, ESATTO 2” LP provides a large 50.9mm free aperture with 10mm of travel, 5 kg of payload capacity and an incredible resolution of 0.03 microns per step! And like all the...

View

Pack

GIOTTO+ALTO bundles

GIOTTO 560 with ALTO-3L telescope cover motor

PLLGIOTTO560ALTO3L

$2,645.00

Be the first to review this product

This bundle includes GIOTTO 560 Smart Flat Field Generator and ALTO-3L telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!

View

Pack

Advanced telescopes

SkyWatcher ESPRIT 100 ED advanced telescope with AZ-EQ6 and EAGLE

TSKSED100AZEQ6EAGLE

Be the first to review this product

SkyWatcher ESPRIT 100 ED with SkyWatcher AZ-EQ6 computerized mount is a great telescope for deep-sky astrophotography that can be used in equatorial or in alt-azimuth mode: it comes with EAGLE for remote control and power, ESATTO robotic focuser, ARCO camera rotator and field de-rotator, GIOTTO smart flat field generator and ALTO telescope cover motor.

View

GIOTTO flat field generators

GIOTTO 430 Smart Flat Field Generator

PLLGIOTTO430

$975.00

Be the first to review this product

GIOTTO 430 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 430mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...

View

ESATTO 3,5" LP

Adapter ESATTO 3,5” LP for telescopes with large 3.3" SC thread

PL3600362

$95.00

Be the first to review this product

Adapter ESATTO 3,5” LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 3,5" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 32mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 112mm of backfocus for your camera and accessories, also when used together...

View

EAGLE-type power cables

Eagle-compatible power cable for SkyWatcher EQ8 mounts - 115cm 8A

PL1000015

$45.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally...

View

ESATTO 4”

Adapter from M110 to M95 female for ESATTO 4"

PL3600319

$155.00

Be the first to review this product

Adapter from M110 to M95 female for ESATTO 4" converts M110x1 thread of the ESATTO 4" draw tube into a M95x1 female thread. This way you can connect to ESATTO 4" the Takahashi photographic adapters.

View

Tripods and piers

GM1000 adapter for C120 pier

C120-GM1000

$325.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This adapter allows you to install the GM1000 mount on the C120 pier.

View

ESATTO 3”

Adapter from M81 to M68 female for ESATTO 3" and ARCO 3"

PL3600289

$87.00

Be the first to review this product

Adapter from M81 to M68 female for ESATTO 3" allows you to connect any camera or accessory with M68 male thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube.

View

Photographic adapters

7mm M48 extension

PL3304807

$29.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Support rings

131mm PLUS support rings

PLLANSU131P

$315.00

Be the first to review this product

The support rings PLUS 131mm can be used with different brands telescopes (for example refractors 100-130mm in diameter) with tube approximately 131mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as SkyWatcher ESPRIT 100ED. Like...

View

Pack

Schmidt-Cassegrain

Celestron C9.25-XLT with dovetail Losmandy type and ESATTO 2"

CE91027-XLTEST2_

Be the first to review this product

Celestron C9.25-XLT with dovetail Losmandy type, thanks to the particular optical design, is perfect for high resolution: even better with the ESATTO 2" robotic microfocuser which eliminates image shift and allows you to focus the telescope with extreme precision, even remotely.

View

Pack

APO refractors

SkyWatcher EVOSTAR 80 ED apochromatic refractor with ESATTO 2"

SKBKED80EST2_

Be the first to review this product

SkyWatcher EVOSTAR 80 ED is a great 80mm f/7.5 apochromatic refractor that, thanks to the ESATTO 2" microfocuser and PLUS rings, is perfect also for the most demanding long exposure astrophotography with heavy cameras and accessories.

View

ESATTO 2"

Adapter ESATTO 2" for GSO/Orion/TPO Ritchey-Chretien 6 and 8 inches

PL3600235

$79.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 152mm f/9 or 203mm f/8 (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. You can use the standard extensions that come with the RC telescope in order to install the focuser at a precise...

View

Pack

Dovetail bars

Losmandy style PLUS dovetail plate with curved blocks for C8 or EdgeHD 800 and Meade SC...

PLLLOS350SAG8_

$158.00

Be the first to review this product

This kit, composed of plate 350mm PLUS Losmandy style dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the Celestron C8 or EdgeHD 800 telescopes or Meade SC and ACF 8" telescopes.

View

Dew heaters

Dew heater for 250mm diameter telescopes

PLLFAS250

$99.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Dovetail clamps

HEQ5, Sirius EQ-G PLUS adapter plate

PLLFLHEQ5

$35.00

Be the first to review this product

HEQ5, Sirius EQ-G PLUS adapter plate

View

Dovetail bars

Losmandy style dovetail plate 645mm PLUS

PLLLOS645P

$159.00

Be the first to review this product

The Losmandy style dovetail plate 645mm PLUS is designed to let you install your telescopes on mounts with Losmandy style dovetail clamp. Since this dovetail plate is 645mm long and thickness is 13mm like all our Losmandy style dovetail plates, we suggest to use it with optical tubes up to 30kg in weight. This 645mm PLUS Losmandy style dovetail plate can...

View

GIOTTO flat field generators

GIOTTO 560mm Smart Flat Field Generator

PLLGIOTTO560

$1,650.00

Be the first to review this product

GIOTTO 560 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 560mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser. GIOTTO is provided with integrated electronics that allow you adjust GIOTTO’s light intensity by 100 steps...

View

ESATTO 3,5" LP

Adapter ESATTO 3.5" LP for GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches

PL3600367

$125.00

Be the first to review this product

If you are searching for the most precise but low profile robotic focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO 3,5" LP to the M117 thread of these telescope. Based on the camera and imaging train you want to connect, you may need...

View

Tripods and piers

GM2000 adapter for C120 pier

C120-GM2000

$345.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This adapter allows you to install the GM2000 mount on the C120 pier.

View

Photographic adapters

9mm M48 extension

PL3304809

$29.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

ESATTO 4”

Adapter ESATTO 4" for Takahashi FSQ-106

PL3600310

$149.00

Be the first to review this product

Adapter ESATTO 4" for Takahashi FSQ-106 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter is designed to have, when used together with ESATTO 4", the same thickness of the original focuser in order to allow you to reach focus with the telescope. Not compatible with FSQ-106EDX 3 and 4.

View

Pack

Ritchey-Chretien

GSO Ritchey-Chretien 254mm f/8 with carbon fiber tube and ESATTO 3"

GSRC10CEST3

Be the first to review this product

GSO 254mm f/8 Ritchey-Chretien with carbon fiber tube and ESATTO 3" robotic microfocuser is the perfect telescope for long exposure astrophotography also with heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.

View

Pack

Newton reflectors

SkyWatcher Newton QUATTRO 254/1000 f3.9 with SESTO SENSO

SKP2501IWP-FSS_

Be the first to review this product

SkyWatcher Newton QUATTRO 254/1000 f3.9 with SESTO SENSO is a 254mm diameter f/3.9 telescope, great for astrophotography, with the most advanced focusing control system. But you can use it also in visual thanks to the included Virtual HandPad of SESTO SENSO 2 that allows you to precisely focus without a computer.

View

ESATTO 3”

Adapter from M81 to M72 female for ESATTO 3" and ARCO 3"

PL3600252

$87.00

Be the first to review this product

Adapter from M81 to M72 female for ESATTO 3" allows you to connect any camera or accessory with M72 male thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube.

View

Pack

Aplanatic Schmidt-Cassegrain

Celestron EdgeHD 14" with Losmandy bar and ESATTO 2"

CE91060-XLTEST2_

Be the first to review this product

Celestron EdgeHD 14" with Losmandy bar and ESATTO 2" is a great aplanatic Schmidt-Cassegrain telescope that offers observatory class performance! Thanks to large 355mm diameter and quality of EdgeHD optics, it's perfect for any applications, visual use to astrophotography.

View

ESATTO 2"

Adapter ESATTO 2" for Takahashi telescopes with M72 thread

PL3600244

$55.00

Be the first to review this product

Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus. By adding the M71/M72 adapter, you can connect it also to the Takahashi Mewlon...

View

EAGLE-type power cables

Eagle-compatible power cable for SkyWatcher EQ6-R and EQ8-R mounts - 115cm 8A

PL1000056

$45.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the plug with screw to prevent being disconnected accidentally from...

View

Support rings

134mm PLUS support rings

PLLANSU134P

$325.00

Be the first to review this product

The 134mm PLUS support rings are designed telescopes with tube approximately 134mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands. Like all the other elements of the PLUS series, these rings are...

View

Dew heaters

Dew heater for 280mm diameter telescopes

PLLFAS280

$99.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Dovetail clamps

AZ-EQ5 PLUS adapter plate

PLLFLAZEQ5

$41.00

Be the first to review this product

AZ-EQ5 PLUS adapter plate

View

EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 3A...

PL1000017

$49.00

Be the first to review this product

This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity, and it offers a locking screw. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. In order to check compatibility with the device you...

View

GIOTTO flat field generators

GIOTTO Smart Flat Field Generator - custom version

PLLGIOTTOCUSTOM

$1,215.00

Be the first to review this product

If you order one of our Observatory Stations, our turn-key solutions for astronomy research or space exploration composed by telescope and dome, we can design a custom version of GIOTTO smart flat field generator in order to match type and diameter of telescope you want to use. And we can also apply our ALTO telescope cover motor in order to let you use...

View

ESATTO 3,5" LP

Adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH200

PL3600365

$195.00

Be the first to review this product

The adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH200 allows you to install ESATTO 3,5" LP focuser to Veloce RH200 telescopes by Officina Stellare. Optical thickness of this adapter is 9mm.

View

Pack

Astrographs

Officina Stellare Veloce RH300 f3 athermal with ESATTO 3,5" LP

VELRH300AT-B

Be the first to review this product

Officina Stellare Veloce RH300 athermal astrograph offers an incredible f3 focal ratio together with large 300mm diameter generating not only incredibly deep astroimages but also rich in details. Its design allows a corrected field all over the large 60 mm diameter so it's perfect also for the largest camera sensors, like 36x36 mm. Thanks to the ESATTO...

View

ESATTO 4”

Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4

PL3600324

$165.00

Be the first to review this product

Adapter ESATTO 4" for Takahashi FSQ-106EDX 3 and 4 allows you to install ESATTO 4" instead of the original Takahashi focuser. This adapter has 35mm optical thickness and it is designed to have, when used together with ESATTO 4", the same thickness of the original focuser (100.5mm) in order to allow you to reach focus with the telescope. Not compatible...

View

Tripods and piers

GM3000 adapter for C120 pier

C120-GM3000

$365.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This adapter allows you to install the GM3000 mount on the C120 pier.

View

Photographic adapters

T2 spacer 0,5mm

PL3304200

$12.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

T2 spacers are available with 0,5mm or 1mm thickness and are used together with T2 extensions in order to fine set extension total thickness.

View

Pack

Schmidt-Cassegrain

Celestron C11-XLT with dovetail Losmandy type and ESATTO 2"

CE91036-XLTEST2

Be the first to review this product

Celestron C11-XLT with dovetail Losmandy type is a 280mm f/10 Schmidt-Cassegrain telescope and, thanks to the ESATTO 2" robotic microfocuser, there is no more image shift and you can focus the telescope with extreme precision, even remotely.

View

Pack

Newton reflectors

SkyWatcher Newton QUATTRO 200/800 f4 with SESTO SENSO

SKP2008IWP-FSS_

Be the first to review this product

SkyWatcher Newton QUATTRO 200/800 f4 with SESTO SENSO is 200mm f/4 telescope perfect for astrophotography, thanks also to advanced features of SESTO SENSO 2 motor. Low weight and dimensions make it perfect to use also with not too large mounts.

View

Pack

APO refractors

SkyWatcher EVOSTAR 100 ED apochromatic refractor with SESTO SENSO

SKBKED100SS_

Be the first to review this product

SkyWatcher EVOSTAR 100 ED with SESTO SENSO and PLUS rings is the 100mm f/9 apochromatic refractor that offers high performance especially for visual use or imaging at high magnifications. Thanks to the most advanced focusing motor and PLUS rings, you can get the most from your telescope.

View

ESATTO 3”

Adapter from M81 to T2 with stop ring for ESATTO 3" and ARCO 3"

PL3600282

$110.00

Be the first to review this product

Adapter from M81 to T2 with stop ring for ESATTO 3" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the T2 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

ESATTO 2"

Adapter ESATTO 2" for telescopes with large 3.3" SC thread

PL3600212

$65.00

Be the first to review this product

SC 3.3” adapter for ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3” adapter has only 2mm of optical thickness, this leaves 77mm of backfocus for your camera and accessories, also when used together with the Celestron EdgeHD .7x focal...

View

Support rings

140mm PLUS support rings

PLLANSU140P

$335.00

Be the first to review this product

The 140mm PLUS support rings are designed telescopes with tube approximately 140mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...

View

Dew heaters

Dew heater for 300mm diameter telescopes

PLLFAS300

$109.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Dovetail clamps

EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro AZ/EQ6-G PLUS adapter plate

PLLFLEQ6

$45.00

Be the first to review this product

EQ6, Atlas EQ-G, AZ-EQ6, Atlas Pro AZ/EQ6-G PLUS adapter plate

View

ESATTO 4”

Adapter ESATTO 4" for Takahashi TOA130

PL3600380

$195.00

Be the first to review this product

Adapter ESATTO 4" for Takahashi TOA130 allows you to install ESATTO 4" instead of the original Takahashi focuser.

View

EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.1 connector and locking screw - 115cm for 8A...

PL1000037

$49.00

Be the first to review this product

This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.1 (inner diameter), positive tip polarity, and it offers a locking screw. This cable connects to the 8A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. In order to check compatibility with the device you...

View

Pack

Newton reflectors

SkyWatcher Newton QUATTRO 150/600 f4 with SESTO SENSO

SKP1506-IWP-FSS_

Be the first to review this product

SkyWatcher Newton QUATTRO 150/600 f4 with SESTO SENSO is the smallest version of QUATTRO reflectors and it's perfect for astrophotography, thanks also to coma corrector included in the price and to advanced features of SESTO SENSO 2 focusing motor. Low weight and reduced dimensions make it perfect to use also with compact mounts.

View

ESATTO 3,5" LP

Adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH300

PL3600361

$295.00

Be the first to review this product

The adapter ESATTO 3,5” LP for OfficinaStellare Veloce RH300 allows you to install ESATTO 3,5" LP focuser to Veloce RH300 telescopes by Officina Stellare. Optical thickness 9mm.

View

12,8V AC adapter for EAGLE - 14A

PL1000057

$195.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

If you want to power EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12,8V 14A power supply (compatible with 100 to 240V) comes a 2,5 meters extension cable and EU (Schuko), UK and USA plugs. When used with the included extension, the power...

View

Photographic adapters

T2 spacer 1mm

PL3304201

$12.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

T2 spacers are available with 0,5mm or 1mm thickness and are used together with T2 extensions in order to fine set extension total thickness.

View

Pack

Ritchey-Chretien

GSO Ritchey-Chretien 304mm f/8 with metal tube and ESATTO 3"

GSRC12MEST3

Be the first to review this product

GSO 304mm f/8 Ritchey-Chretien with metal tube and ESATTO 3" robotic microfocuser is the perfect telescope for long exposure astrophotography also with heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.

View

Pack

APO refractors

SkyWatcher EVOSTAR 100 ED apochromatic refractor with ESATTO 2"

SKBKED100EST2_

Be the first to review this product

SkyWatcher EVOSTAR 100 ED is a great 100mm f/9 apochromatic refractor that, thanks to the ESATTO 2" microfocuser and PLUS rings, is perfect also for the most demanding astrophotography with heavy cameras and accessories.

View

ESATTO 3”

Adapter from M81 to M48 with stop ring for ESATTO 3" and ARCO 3"

PL3600277

$110.00

Be the first to review this product

Adapter from M81 to M48 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M48 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M48 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

ESATTO 2"

Adapter ESATTO 2" for telescopes with SC thread

PL3600209

$35.00

Be the first to review this product

Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Schmidt-Cassegrain telescopes like the 8” and 9.25” Celestron SCT and EdgeHD 800 models. By adding the SC adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus, avoiding focus shift and mirror...

View

Dew heaters

Dew heater for 350mm diameter telescopes

PLLFAS350

$109.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Pack

Dovetail bars

Losmandy style PLUS dovetail plate with curved blocks for C9.25, C11, EdgeHD 9.25 e 11...

PLLLOS495SAG925_

$178.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

This kit, composed of plate 495mm Losmandy style PLUS dovetail plate and PLUS curved blocks, can be installed either below (for connecting a Losmandy type dovetail bar under the telescope) and above (for supporting a parallel telescope) to the C9.25 or C11 Schmidt-Cassegrain or EdgeHD 925 and 1100 aplanatic Schmidt-Cassegrain telescopes by Celestron.

View

Support rings

145mm PLUS support rings

PLLANSU145P

$345.00

Be the first to review this product

The 145mm PLUS support rings are designed telescopes with tube approximately 145mm in diameter to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...

View

EAGLE-type power cables

Eagle-compatible power cable for QSI cameras - 115cm 8A

PL1000049

$59.00

Be the first to review this product

The EAGLE computer can provide 12V power to QSI cameras. This EAGLE-compatible power cable features a 12V jack on one end, designed for the QSI camera, and an 8A EAGLE-style plug with a secure screw connection on the other end to prevent accidental disconnections.

View

ESATTO 3,5" LP

Adapter ESATTO 3,5” LP for PlaneWave DeltaRho 350

PL3600386

$295.00

Be the first to review this product

The adapter ESATTO 3,5” LP for PlaneWave DeltaRho 350 allows you to install ESATTO 3,5" LP focuser to DeltaRho 350 telescopes by PlaneWave. Optical thickness 23.36mm.

View

Dovetail bars

Losmandy style dovetail plate 915mm PLUS

PLLLOS915P

$245.00

Be the first to review this product

The Losmandy style dovetail plate 915mm PLUS is designed to let you install your telescopes on mounts with Losmandy style dovetail clamp. Since this dovetail plate is 915mm long and thickness is 13mm like all our Losmandy style dovetail plates, we suggest to use it with optical tubes up to 30kg in weight. This 915mm PLUS Losmandy style dovetail plate can...

View

ESATTO 4”

Adapter ESATTO 4" for Officina Stellare ProRC, RiDK, RiFAst

PL3600326

$235.00

Be the first to review this product

The adapter ESATTO 4" for Officina Stellare ProRC, RiDK, RiFAst allows you to install ESATTO 4" focuser to ProRC, RiDK, RiFAst telescopes by Officina Stellare that come with M120x1.5 female thread in the rear plate.

View

Photographic adapters

M48 spacer 0,5mm

PL3304800

$12.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

M48 spacers are available with 0,5mm or 1mm thickness and are used together with M48 extensions in order to fine set extension total thickness.

View

Support rings

150mm PLUS support rings

PLLANSU150P

$355.00

Be the first to review this product

150mm PLUS support rings can be used with all telescopes with 150mm diameter tube to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC...

View

ESATTO 3”

Adapter from M81 to M54 with stop ring for ESATTO 3" and ARCO 3"

PL3600275

$110.00

Be the first to review this product

Adapter from M81 to M54 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M54 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

ESATTO 2"

Adapter from M56 to M57 with stop ring for ESATTO 2" and ARCO 2"

PL3600227

$95.00

Be the first to review this product

Adapter from M56 to M57 with stop ring for ESATTO 2" allows you to connect any camera or accessory with M57x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" focuser draw tube. Thanks to the M57 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...

View

Dew heaters

Dew heater for 450mm diameter telescopes

PLLFAS450

$119.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

12V power cable with cigarette plug for Eagle - 250cm

PL1000029

$49.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

12V power cable with cigarette plug for Eagle - 250cm

View

Dovetail bars

Losmandy style dovetail plate 1100mm PLUS

PLLLOS1100P

$325.00

Be the first to review this product

The Losmandy style dovetail plate 1100mm PLUS is designed to let you install your telescopes on mounts with Losmandy style dovetail clamp. Since this dovetail plate is 1100mm long and thickness is 13mm like all our Losmandy style dovetail plates, we suggest to use it with optical tubes up to 30kg in weight. This 1100mm PLUS Losmandy style dovetail plate...

View

Photographic adapters

M48 spacer 1 mm

PL3304801

$12.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

M48 spacers are available with 0,5mm or 1mm thickness and are used together with M48 extensions in order to fine set extension total thickness.

View

Pack

Ritchey-Chretien

GSO Ritchey-Chretien 254mm f/8 with truss carbon fiber tube and ESATTO 3"

GSRC10TrussEST3

Be the first to review this product

GSO 254mm f/8 Ritchey-Chretien with truss carbon fiber tube and ESATTO 3" robotic microfocuser is the perfect telescope for long exposure astrophotography also with heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.

View

Pack

APO refractors

SkyWatcher EVOSTAR 120 ED apochromatic refractor with SESTO SENSO

SKBKED120SS_

Be the first to review this product

SkyWatcher EVOSTAR 120 ED apochromatic refractor with SESTO SENSO and PLUS rings is the kit created by PrimaLuceLab at a special price! Get the best performance from the SkyWatcher EVOSTAR 120 ED thanks to the most advanced focusing motor and the PLUS rings.

View

ESATTO 3”

Adapter from M81 to M57 with stop ring for ESATTO 3" and ARCO 3"

PL3600279

$110.00

Be the first to review this product

Adapter from M81 to M57 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M57 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M57 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

ESATTO 2"

Adapter from M56 to M54 with stop ring for ESATTO 2" and ARCO 2"

PL3600242

$95.00

Be the first to review this product

Adapter from M56 to M54 with stop ring for ESATTO 2" allows you to connect any camera or accessory with M54x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M54 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

Eagle power cable with Anderson connector with 16A fuse- 250cm

PL10000AND

$59.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

In order to power the Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has an Anderson connector with 16A fuse to...

View

Support rings

155mm PLUS support rings

PLLANSU155P

$369.00

Be the first to review this product

155mm PLUS support rings can be used with all telescopes with 155mm diameter tube like Takahashi FS-152 and TOA-130 telescopes (or other telescopes brands with tube approximately 155mm in diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like...

View

EAGLE-type power cables

Eagle-compatible power cable for SBIG STL and STXL camera - 115cm 8A

PL1000004

$59.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The Eagle control unit can directly power supply SBIG STL and STXL camera. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

View

Pack

Dovetail clamps

PLUS dovetail clamp with 1 Kg counterweight

PLL-CONTRPLUS-M_

$103.00

Be the first to review this product

The dovetail clamp combined with the counterweight PLUS 1 kg , provides an excellent way to offset the unbalanced optical frames. It can be installed in front or rear to the optics on the support bar Vixen or Losmandy type. You can also install more weights to each other simply by screwing them to each other through the screws supplied as standard.

View

Pack

APO refractors

SkyWatcher EVOSTAR 120 ED apochromatic refractor with ESATTO 2"

SKBKED120EST2_

$3,008.00

Be the first to review this product

SkyWatcher EVOSTAR 120 ED is a great 120mm f/7.5 apochromatic refractor that, thanks to the ESATTO 2" microfocuser and PLUS rings, is perfect also for the most demanding long exposure astrophotography with heavy cameras and accessories.

View

ESATTO 3”

Adapter from M81 to M68 with stop ring for ESATTO 3" and ARCO 3"

PL3600262

$110.00

Be the first to review this product

Adapter from M81 to M68 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M68 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

ESATTO 2"

Adapter from M56 to SC with stop ring for ESATTO 2" and ARCO 2"

PL3600225

$125.00

Be the first to review this product

The SC thread adapter for ESATTO 2" allows you to connect any accessory with SC female thread, like the SC focal reducers to ESATTO. Just thread this adapter to the M56 thread in the ESATTO 2" focuser draw tube. Thanks to the SC stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the...

View

Support rings

168mm PLUS support rings

PLLANSU168P

$379.00

Be the first to review this product

The 168mm PLUS support rings are designed for telescopes with tube approximately 168mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision...

View

12V power cable with banana plugs for Eagle - 250cm

PL1000028

$45.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

Pack

Ritchey-Chretien

GSO Ritchey-Chretien 304mm f/8 with truss carbon fiber tube and ESATTO 3"

GSRC12TrussEST3

Be the first to review this product

GSO 304mm f/8 Ritchey-Chretien with truss carbon fiber tube and ESATTO 3" robotic microfocuser is the perfect telescope for long exposure astrophotography also with heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.

View

ESATTO 3”

Adapter from M81 to M72 with stop ring for ESATTO 3" and ARCO 3"

PL3600272

$110.00

Be the first to review this product

Adapter from M81 to M72 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M72 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube. Thanks to the M72 stop ring for ESATTO 3" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

ESATTO 2"

Adapter from M56 to M48 with stop ring for ESATTO 2" and ARCO 2"

PL3600216

$95.00

Be the first to review this product

M48x0.75 adapter for ESATTO 2" allows you to connect any camera or accessory with M48x0.75 female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the M48 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

Support rings

180mm PLUS support rings

PLLANSU180P

$390.00

Be the first to review this product

The 180mm PLUS support rings can be used with telescopes that have 180mm diameter tube like Takahashi TOA150 to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical...

View

ESATTO 3”

Adapter from M81 to M65 with stop ring for ESATTO 3" and ARCO 3"

PL3600350

$150.00

Be the first to review this product

Adapter from M81 to M65 with stop ring for ESATTO 3" and ARCO 3" allows you to connect any camera or accessory with M65 female thread. Just thread this adapter to the M81 thread of ESATTO 3" or ARCO 3". Thanks to the M65 stop ring you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object. Optical...

View

ESATTO 2"

Adapter from M56 to T2 with stop ring for ESATTO 2" and ARCO 2"

PL3600218

$95.00

Be the first to review this product

Adapter from M56 to T2 with stop ring for ESATTO 2" allows you to connect any camera or accessory with T2 (M42x0.75) female thread. Just thread this adapter to the M56 thread of the ESATTO 2" draw tube. Thanks to the T2 stop ring for ESATTO 2" you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired object.

View

Ritchey-Chretien

GSO Ritchey-Chretien 355mm f/8 with truss carbon fiber tube

GSRC14Truss

Be the first to review this product

GSO Ritchey-Chretien 355mm f/8 with truss carbon fiber tube is perfect for astrophotography is perfect for those looking for a quality telescope for deep-sky astrophotography at an incredible price. Thanks to the carbon tube, the GSO RC 355mm f/8 not only is more stable and lighter but also it has higher thermal stability, so it keeps the focus point more...

View

Support rings

235mm PLUS support rings

PLLANSU235P

$525.00

Be the first to review this product

235mm PLUS support rings can be used with any brands telescopes (for example Newton 200mm in diameter) with tube approximately 235mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision...

View

Support rings

244mm PLUS support rings

PLLANSU244P

$655.00

Be the first to review this product

244mm PLUS support rings can be used with any brands telescopes (for example Takahashi Mewlon 210mm) with tube 244mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built with CNC...

View

ESATTO 3”

Adapter ESATTO 3" for Takahashi FSQ85

PL3600271

$95.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you can also connect your Takahashi accessories. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your...

View

Ritchey-Chretien

GSO Ritchey-Chretien 406mm f/8 with truss carbon fiber tube

GSRC16Truss

Be the first to review this product

GSO Ritchey-Chretien 406mm f/8 with truss carbon fiber tube is perfect for astrophotography is perfect for those looking for a quality telescope for deep-sky astrophotography at an incredible price. Thanks to the carbon tube, the GSO RC 406mm f/8 not only is more stable and lighter but also it has higher thermal stability, so it keeps the focus point more...

View

EAGLE-type power cables

Eagle-compatible power cable for Canon RP, EOS 750D, 760D 3A

PL1000008

$65.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

DSLR camera use lithium batteries that, during long exposure astrophotography, can run out of charge and thus avoid you imaging the night sky. That's why we created these cables with voltage regulator and false battery that allow you to power your camera directly from the Eagle (also Eagle Core) in place of the battery.

View

Pack

APO refractors

SkyWatcher ESPRIT 80 ED apochromatic refractor with SESTO SENSO

SKSED80SS

Be the first to review this product

SkyWatcher ESPRIT 80 ED is a compact and lightweight apochromatic refractor, ED triplet 80mm f/5, that thanks to SESTO SENSO 2, PLUS rings and field flattener, is perfect for wide field astrophotography of deep-sky object!

View

ESATTO 3”

Adapter ESATTO 3" for Takahashi telescopes with M72 thread

PL3600245

$115.00

Be the first to review this product

Thanks to its low profile, the ESATTO 3" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 3" focuser directly onto the back of these telescopes, and use the ESATTO to achieve more precise focus.

View

EAGLE-type power cables

Eagle-compatible power cable for Nikon D3100, D3200, D3300, D5100, D5200, D5300, D5500 3A

PL1000007

$75.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

ESATTO 3”

Adapter ESATTO 3" for GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches

PL3600236

$125.00

Be the first to review this product

If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and cabron tubes) for astrophotography, this adapter allows you to connect ESATTO 3" to the M117 thread of these telescope. Optical thickness of the "PL3600236" adapter is 43mm so, when you add the ESATTO 3"...

View

Pack

APO refractors

SkyWatcher ESPRIT 100 ED apochromatic refractor with ESATTO 3"

SKSED100EST3

Be the first to review this product

SkyWatcher ESPRIT 100 ED with ESATTO 3" is a great 100mm f/5.5 apochromatic refractor that, thanks to ESATTO 3" microfocuser and PLUS rings, is perfect for astrophotography also with heavy cameras and accessories.

View

ESATTO 3”

Adapter ESATTO 3" for Borg 90FL and 107FL f3.9

PL3600268

$195.00

Be the first to review this product

If you are searching for the most precise motorized focuser for Borg 90FL and 107FL f3.9, this adapter allows you to connect ESATTO 3" to these telescopes. Remove the original focuser of the Borg 90FL and 107FL f3.9 and install ESATTO 3". In order to reach the focus you can use the same photo adapters that you use with the standard focuser.

View

EAGLE-type power cables

Eagle-compatible power cable for FLI camera - 115cm 8A

PL1000002

$89.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The EAGLE control unit can directly power supply FLI camera. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally from the EAGLE.

View

ESATTO 3”

Adapter ESATTO 3" for Skywatcher ESPRIT 80 ED

PL3600643

$199.00

Be the first to review this product

If you are searching for the most precise motorized focuser for Skywatcher ESPRIT 80 ED, this adapter allows you to connect ESATTO 3" to this telescope. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus with your camera.

View

EAGLE-type power cables

Eagle-compatible power cable for Astro-Physics mounts with CP1/CP2/CP3 controller 8A

PL1000033

$89.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The EAGLE control unit can directly power supply Astro-Physics mounts. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally...

View

ESATTO 3”

Adapter ESATTO 3" for SkyWatcher ESPRIT 100 ED

PL3600288

$255.00

Be the first to review this product

Adapter ESATTO 3" for SkyWatcher ESPRIT 100 ED.

View

Pack

APO refractors

SkyWatcher ESPRIT 120 ED apochromatic refractor with ESATTO 3"

SKSED120EST3

Be the first to review this product

SkyWatcher ESPRIT 120 ED with ESATTO 3" is a great 120mm f/7 apochromatic refractor that, thanks to ESATTO 3" microfocuser and PLUS rings, is perfect for astrophotography also with heavy cameras and accessories.

View

EAGLE-type power cables

Eagle-compatible power cable for Astro-Physics mounts with CP4 controller 8A

PL1000032

$89.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

View

EAGLE-type power cables

Eagle-compatible power cable for SBIG ALUMA AC2020 and AC4040 camera - 115cm 8A

PL1000058

$89.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The EAGLE control unit can directly power supply ALUMA AC4040 and ALUMA AC 2020 cameras. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being...

View

ESATTO 3”

Adapter ESATTO 3" for SkyWatcher ESPRIT 120 ED and 150 ED

PL3600253

$255.00

Be the first to review this product

Adapter ESATTO 3" for SkyWatcher ESPRIT 120 ED and 150 ED

View

New
Pack

Astrographs

Telescopi Italiani Astrograph TI35 f/3,5 with ESATTO 3,5" LP and ARCO 3"

TELITATI35f35-B

Be the first to review this product

The Telescopi Italiani Astrograph TI35 f/3,5 with ESATTO 3,5" LP and ARCO 3" is a state-of-the-art instrument meticulously crafted for astronomy research and advanced astrophotography. Featuring a 350mm optical aperture and a focal length of 1230 mm (f/3.5), this astrograph embodies exceptional performance within a remarkably compact and lightweight...

View

EAGLE-type power cables

Eagle-compatible power cable for SBIG StarChaser - 115cm 3A

PL1000060

$89.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The EAGLE control unit can directly power supply SBIG StarChaser cameras. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 3A plug with screw to prevent being disconnected accidentally...

View

ESATTO 3”

Adapter ESATTO 3" for Meade 16 inches with 4” thread

PL3600292

$295.00

Be the first to review this product

Adapter ESATTO 3" for Meade 16 inches with 4” thread allows you to connect ESATTO 3" to Meade LX200 SCT, LX200 GPS, LX200-ACF, LX600-ACF, LX800-ACF, LX850-ACF 16 inches telescopes or to all the telescopes that have 4-inch male thread

View

APO refractors

Borg fluorite apochromatic refractor 90FL f3.9 with ESATTO 3"

BORG9039EST3

Be the first to review this product

Borg fluorite apochromatic refractor 90FL f3.9 with ESATTO 3", 90mm diameter, 350mm focal length (f3.9), 6 elements fluorite apochromat, carbon fiber tube with 3 inches ESATTO focuser, rear thread for camera connection, PLUS support rings.

View

Tripods and piers

Blank adapter for C120 pier

C120-BLANK

$375.00

Be the first to review this product

The blank adapter for C120 pier comes with just 4 holes to connect C120 pier and no pre-made holes to connect it to mount: this way if you want to connect to C120 pier a mount that has no pre-made adapter, you can order this adapter and make your own holes to connect your mount. This adapter is made in aluminum.

View

EAGLE-type power cables

Eagle-compatible power cable for SBIG ALUMA CCD and STC CMOS - 115cm 8A

PL1000059

$89.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product

The EAGLE control unit can directly power supply SBIG ALUMA CCD and STC CMOS cameras. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...

View

ESATTO 3”

Adapter ESATTO 3" for Takahashi TSA 120

PL3600296

$295.00

Be the first to review this product

If you are searching for the most precise motorized focuser for Takahashi TSA120, this adapter allows you to connect ESATTO 3" to this telescope. By adding the optional camera adapters with stop ring you can also connect your Takahashi accessories. Based on the camera and accessories train you want to connect, you may need extenders to reach the focus...

View

APO refractors

Borg fluorite apochromatic refractor 107FL f3.9 with ESATTO 3"

BORG10739EST3

Be the first to review this product

Borg fluorite apochromatic refractor 107FL f3.9 with ESATTO 3", 107mm diameter, 417mm focal length (f3.9), 6 elements fluorite apochromat with Canon lens, carbon fiber tube with 3 inches ESATTO focuser, M57 camera rotator, rear thread for camera connection, PLUS support rings. This wonderful apochromatic refractor with fluorite optics offers an incredible...

View

New
Pack

Astrographs

Telescopi Italiani Astrograph TI45 f/3,5 with ESATTO 3,5" LP and ARCO 3"

TELITATI45f35-B

Be the first to review this product

The Telescopi Italiani Astrograph TI45 f/3,5 with ESATTO 3,5" LP and ARCO 3" is a state-of-the-art instrument designed to provide exceptional performance for astronomy research and advanced astrophotography. With a 450 mm optical aperture and a focal length of 1575 mm (f/3.5), this astrograph, based on a Modified Harmer-Wynne optical configuration with...

View

EAGLE-type power cables

Eagle-compatible power Y cable for 3A port

PL1000047

$59.00

Be the first to review this product

This "Eagle-compatible power Y cable for 3A port" connects to 3A 12V power out port of the EAGLE and provides you 2 power out ports (with 3A style connector). Just consider that, if you connect 2 devices to the same cable, the maximum provided current will be 3A (and not 6A).

View

EAGLE-type power cables

Eagle-compatible power Y cable for 8A port

PL1000048

$59.00

Be the first to review this product

This "Eagle-compatible power Y cable for 8A port" connects to 8A 12V power out port of the EAGLE and provides you 2 power out ports (with 8A style connector). Just consider that, if you connect 2 devices to the same cable, the maximum provided current will be 8A (and not 16A).

View

New
Pack

APO refractors

Takahashi FSQ-85EDX apochromatic refractor with ESATTO 3"

FSQ85EDXEST3

Be the first to review this product

Takahashi FSQ-85EDX with ESATTO 3" is a wonderful compact and powerful 85mm f/5.3 Petzval quadruplet apochromatic refractor that, thanks to ESATTO 3" focuser and PLUS rings, is perfect for wide-field astrophotography also with large sensor cameras.

View

Home

Be the first to review this product

View

Photographic adapters

10mm M68 extension

PL3306810

$56.00

Be the first to review this product

PrimaLuceLab M68 extension with 10mm thickness, it comes with M68x1 thread on both sides (one side is male, the other is female). Completely made of metal with black anodizing (both internal and external), this extension offers an external knurling for a better grip (very useful for example when screwing or unscrewing).

View