Close

You’re shopping from: United States of America

Home

3% more discount if you pay with bank transfer - insert product in cart to get discount

Computer
Computer
Featured
Featured
Rotators
Rotators
Complete telescopes
Complete telescopes
Optical tubes
Optical tubes
Mounts
Mounts
Focusers
Focusers
Dovetail bars and rings
Dovetail bars and rings
Various accessories
Various accessories
Gift card
Gift card
Calibration
Calibration
Observatory Stations
Observatory Stations
Radio astronomy
Radio astronomy
Photo accessories
Photo accessories
ASTRO-RES Observatory...
Observatory Stations

ASTRO-RES Observatory station with 3m dome

PLLASTRORES1
Price starts at
$75,000.00
Be the first to review this product
ASTRO-RES Observatory station is the complete astronomical observatory designed for astronomy research and education: thanks to our long experience with optical telescopes, we can support astronomy institutes all around the world. ASTRO-RES Observatory Station is remotely controlled and powered thanks to the EAGLE, and it comes with ESATTO focuser, ARCO...
View
Blue color bushing for...
Spare parts

Blue color bushing for SESTO SENSO 2

PL3600116C
$9.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
This blue color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 2.4mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.
View
C120 pier for concrete base
  • Pack
Tripods and piers

C120 pier for concrete base

C120-C-B
$1,345.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
C120 pier is the perfect solution to install even a large telescope in an astronomical observatory. The C120 pier has a high load capacity (150 kg) and, compared to a standard tripod, it provides high stability and needs for less space. A pier also prevent the telescope to touch the tripod legs during movements! This pier is available also with different...
View
M110 35mm extension tube...
ESATTO 4”

M110 35mm extension tube for ESATTO 4"

PL3600325
$105.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The M110 35mm extension tube can be directly threaded to the ESATTO 4" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M110 extension tube has 35mm thickness, it's made up of aluminum, black anodized and it has a M110 female on the camera side this way you can connect all the ESATTO 4" camera adapters.
View
M86x1 adapter for ARCO 3"
ARCO 3"

M86x1 adapter for ARCO 3"

PL3600463
$69.00
Be the first to review this product
M86x1 adapter for ARCO 3" allows you to connect rotator to focusers or correctors that come with 86x1 female thread and to control it through SESTO SENSO 2 installed on the focuser.
View
M48x0.75 female adapter for...
ARCO 2"

M48x0.75 female adapter for ARCO 2"

PL3600424
$49.00
Be the first to review this product
M48x0.75 female adapter for ARCO 2" allows you to connect rotator to focusers or correctors that come with M48x0.75 male thread and to control it through SESTO SENSO 2 installed on the focuser. ​PL3600424 adapter adds 6.7mm to ARCO 2” optical thickness so the total optical thickness (ARCO 2" + PL3600424) becomes 26.7mm.
View
M48 female to T2 male adapter
Photographic adapters

M48 female to T2 male adapter

PL3304842
$22.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
M48 female to T2 male adapter allows you to connect accessories with M48 thread (48x0.75 male) to those with T2 thread (42x0,75 female). In fact sometimes the photographic accessories come with different threads: the T2 and the M48 are the most widespread and used. This adapter is made entirely of metal and has black anodizing. The adapter is very thin...
View
M56 15mm extension tube for...
ESATTO 2"

M56 15mm extension tube for ESATTO 2" and ARCO 2"

PL3600286
$45.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The M56 15mm extension tube can be directly threaded to the ESATTO 2" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M56 extension tube has 15mm thickness, it's made up of aluminum, black anodized and it has a M56 female on the camera side this way you can connect all the ESATTO 2" camera adapters.
View
M81 25mm extension tube for...
ESATTO 3”

M81 25mm extension tube for ESATTO 3" and ARCO 3"

PL3600285
$59.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm thickness, it's made up of aluminum, black anodized and it has a M81 female on the camera side this way you can connect all the ESATTO 3" camera adapters.
View
SESTO SENSO 2 33mm adapter
SESTO SENSO

SESTO SENSO 2 33mm adapter

SESTOSENSO-AD33II
$76.00
Be the first to review this product
This 33mm adapter allows you to install SESTO SENSO 2 on focusers that come with a 33mm diameter shaft, like 2,5" and 3" FeatherTouch focusers (or other focusers with a 33mm diameter shaft). Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter shaft (the most common diameter on the market). In order to connect it to focusers...
View
GSO Ritchey-Chretien 203mm...
  • Pack
Ritchey-Chretien

GSO Ritchey-Chretien 203mm f/8, metal tube with ESATTO 2"

GSRC8MEST2_
Be the first to review this product
GSO 203mm f/8 Ritchey-Chretien with metal tube is a great compact telescope for long exposure astrophotography and it uses and ESATTO 2" robotic microfocuser to perfectly focus also heavy cameras and accessories. Thanks to the optional corrector it offers a large corrected field.
View
Eagle-compatible power...
EAGLE-type power cables

Eagle-compatible power cable with 5.5 - 2.5 connector - 115cm for 3A port

PL1000044
$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
This Eagle-compatible power cable allows you to power devices that comes with 5.5 (outer diameter) - 2.5 (inner diameter), positive tip polarity. This cable connects to the 3A port of the EAGLE, with screw connector to avoid unwanted detachment. The cable is 115cm long. By using this cable, you can power devices like the ESATTO focusers and the SESTO...
View
Guide scope support for ECCO
ECCO

Guide scope support for ECCO

ECCOSUP
$79.00
Be the first to review this product
ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).
View
Dew heater for 80mm...
Dew heaters

Dew heater for 80mm diameter telescopes

PLLFAS80
$59.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 80mm diameter telescopes can be easily...
View
EAGLE type connector for 3A...
EAGLE-type power cables

EAGLE type connector for 3A power OUT ports

PL1000036
$15.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
EAGLE type connector for 3A power OUT ports allow you to it allows you to create your own cables to 12V power, through EAGLE, various instruments such as mounts, CCD cameras and other astro photography accessories. Included in the package you find instructions to proper cable heading.
View
60mm CompactGuide scope...
Guiding systems

60mm CompactGuide scope with PLUS 80mm guide rings

PLLCG60
$185.00
1 Reviews
60mm CompactGuide scope with PLUS rings is, at a really affordable price, a perfect guide scope with 60mm diameter and 240mm focal length (f/4) achromatic lens, non rotative 31,8mm helical focuser and 80mm PLUS guide rings (each with 3 screws with nylon tip) for an easy and rigid connection. Thanks to the included extension, it can also be used as a...
View
Side by side Losmandy plate...
  • Pack
Side by side plates

Side by side Losmandy plate 240mm PLUS

PLLPDLOS240P_
$210.00
Be the first to review this product
The side-by-side plates allow you to install two telescopes in parallel on the same mount and they are thus useful for both photographic and visual applications. Using these side-by-side plates it's also possible, for example, to install a camera (like a DSLR) in parallel to the main telescope to take a picture of the sky through their own lens. This...
View
Maxi Dovetail Clamp...
Dovetail clamps

Maxi Dovetail Clamp Vixen+Losmandy PLUS

PLLMORVLPM
$198.00
Be the first to review this product
The Maxi dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or to install it on the mounts instead of the original...
View
"PLUS curved blocks for...
Spacers and curved blocks

"PLUS curved blocks for Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and...

PLLSAG925
$69.00
1 Reviews
If you have a Celestron C8, C9.25, C11, EdgeHD 800, 925, 1100 or Meade SC and ACF 8" telescope and want to connect a Losmandy type bar under the telescope to connect it on a mount or set the same bar over to the telescope to support a parallel telescope, the best method is to fix these curved blocks that then allow you to connect the 350mm or 495mm...
View
Vixen style dovetail plate...
Dovetail bars

Vixen style dovetail plate 240mm PLUS

PLLVIX240P
$59.00
Be the first to review this product
The Vixen style dovetail plate 240mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 240mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...
View
90mm PLUS support rings
Support rings

90mm PLUS support rings

PLLANSU90P
$225.00
1 Reviews
The 90mm PLUS support rings are designed for telescopes with tube approximately 90mm in diameter, to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these rings are made with high mechanical precision (built...
View
NSGen-II noise generator...
  • New
Accessories for radio telescopes

NSGen-II noise generator for absolute calibration for SPIDER500

NSGEN-II-5
$3,950.00
Be the first to review this product
NSGen radio telescope noise generator for absolute calibration is designed for SPIDERs and it can be used to calculate the flux in Jy of a radio source or sky area, by compensating atmospheric attenuation or any gain loss because of different factors (for example, antenna deformation because of its weight). The NSGen noise generator is installed on the...
View
EAGLE6 XTM computer for...
  • New
EAGLE

EAGLE6 XTM computer for telescopes and astrophotography

EAGLE6XTM
$2,995.00
Be the first to review this product
EAGLE6 XTM is our most powerful computer ever for telescopes and astrophotography with blazing-fast i7 processor, Industrial Grade 32 GB fast DDR4 RAM memory, huge Industrial Grade 2TB SSD drive (NVMe) and Thunderbolt 4 connectivity for even higher speed, up to 40 Gbps, for devices like external storage memories. It's the perfect solution even for the...
View
DUAL-PRO Observatory...
  • New
Observatory Stations

DUAL-PRO Observatory Station with 3m dome

PLLDUALPRO1
Price starts at
$139,000.00
Be the first to review this product
DUAL-PRO is the Observatory Station with dome and dual telescope designed by PrimaLuceLab to provide a professional level but compact solution that can be used for many applications: remote space exploration, space situational awareness, astrophotography and astronomy education/outreach. DUAL-PRO includes a very high precision and load capacity alt-az...
View