Close

You’re shopping from: United States of America

Home

3% more discount if you pay with bank transfer - insert product in cart to get discount

Computer
Computer
Featured
Featured
Rotators
Rotators
Complete telescopes
Complete telescopes
Optical tubes
Optical tubes
Mounts
Mounts
Focusers
Focusers
Dovetail bars and rings
Dovetail bars and rings
Various accessories
Various accessories
Gift card
Gift card
Calibration
Calibration
Observatory Stations
Observatory Stations
Radio astronomy
Radio astronomy
Photo accessories
Photo accessories
Eagle-compatible power...
EAGLE-type power cables

Eagle-compatible power cable for SBIG STT and STF CCD camera - 115cm 8A

PL1000018
$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The Eagle control unit can directly power supply SBIG STT and STF CCD camera. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected...
View
115mm PLUS support rings
Support rings

115mm PLUS support rings

PLLANSU115P
$269.00
Be the first to review this product
The support rings PLUS 115mm can be used with different brands telescopes (for example refractors 120-130mm in diameter) with tube approximately 115mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen...
View
CMP-19 computer for radio...
  • New
Accessories for radio telescopes

CMP-19 computer for radio telescopes

CMP-19
$3,034.00
Be the first to review this product
CMP-19 is the Windows 10 Pro computer to be installed on a standard 19″ rack and it’s the best solution to install RadioUniversePRO software and remotely control SPIDER radio telescopes. CMP-19 has the same form factor of all the other SPIDER instruments that can be installed on a rack.
View
Adapter from M60 to M54...
ESATTO 2" LP

Adapter from M60 to M54 with stop ring for ESATTO 2” LP

PL3600547
$125.00
Be the first to review this product
Adapter from M60 to M54 with stop ring for ESATTO 2" LP allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M60 thread of the ESATTO 2" LP draw tube. Thanks to the M54 stop ring for ESATTO 2" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
View
Adapter ESATTO 2" LP for...
ARCO 2"

Adapter ESATTO 2" LP for ARCO 2"

PL3600538
$95.00
Be the first to review this product
Adapter ESATTO 2" LP for ARCO 2" allows you to connect the rotator to ESATTO 2" LP robotic focuser and control it through the special port on ESATTO. By adding this adapter to ARCO 2", thickness of rotator is 22mm.
View
Black color bushing long...
Spare parts

Black color bushing long for SESTO SENSO 2 adapters

PL3600117
$16.00
Be the first to review this product
Black color bushing long is usually included in 33 or 37mm adapters that allow to connect SESTO SENSO 2 to focusers with shafts larger than 25mm. If you upgraded from SESTO SENSO first generation to SESTO SENSO 2 and you also have one of the first generation adapters, you can just order the "Black color bushing long for SESTO SENSO 2 adapters" and connect...
View
Celestron EdgeHD 9.25"...
  • Pack
Advanced telescopes

Celestron EdgeHD 9.25" advanced telescope with AZ-EQ6 and EAGLE

TCE91040AZEQ6EAGLE
Be the first to review this product
Celestron EdgeHD 9.25" advanced telescope with SkyWatcher AZ-EQ6 computerized mount that can be used in equatorial or in alt-azimuth mode, EAGLE to remotely control and power, ESATTO robotic focuser, ARCO camera rotator and field de-rotator, GIOTTO smart flat field generator and ALTO telescope cover motor: a powerful but still compact telescope for long...
View
GIOTTO 430 with ALTO-3...
  • Pack
GIOTTO+ALTO bundles

GIOTTO 430 with ALTO-3 telescope cover motor

PLLGIOTTO430ALTO3
$1,870.00
Be the first to review this product
This bundle includes GIOTTO 430 Smart Flat Field Generator and ALTO-3 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
View
Adapter ESATTO 4" for ARCO...
ARCO 3"

Adapter ESATTO 4" for ARCO 3", only for FSQ106

PL3600469
$145.00
Be the first to review this product
In order to prevent the ARCO 3" rotator to touch the internal field flattener of FSQ-106 telescope, we designed this special version of adapter that allows you to connect the ARCO 3" rotator to ESATTO 4" focuser, when installed on the FSQ-106. This adapter optical thickness is 10,5mm so, by adding it to ARCO 3", rotator optical thickness becomes 33,5mm....
View
GIOTTO 320 Smart Flat Field...
GIOTTO flat field generators

GIOTTO 320 Smart Flat Field Generator

PLLGIOTTO320
$795.00
Be the first to review this product
GIOTTO 320 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 320mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
View
ALTO-1 telescope cover...
ALTO telescope cover motor

ALTO-1 telescope cover motor for GIOTTO up to 220mm

PLLALTO1
$495.00
Be the first to review this product
ALTO-1 is the telescope cover motor we designed to let you use GIOTTO for sizes up to 220mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows...
View
Adapter ESATTO 3,5" LP for...
ESATTO 3,5" LP

Adapter ESATTO 3,5" LP for telescopes with SC thread

PL3600366
$95.00
Be the first to review this product
By adding this adapter, you can connect the ESATTO 3,5" LP low profile robotic focuser directly onto the back of SC telescopes. Optical thickness of this adapter is just 10mm.
View