Home

3% more discount if you pay with bank transfer - insert product in cart to get discount

Optical finders

DX finder base

PLLBACEDX
$29.00
Be the first to review this product
DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.
$59.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The dew heater is placed on the optical tube to prevent optics dewing. A very common problem especially in winter and in sealed optical tubes, such as refractors or Schmidt-Cassegrain. These dew heaters, 12 V powered, heat the telescope preventing the formation of condensation on the optics. This dew heater for 100mm diameter telescopes can be...
Support rings

95mm PLUS support rings

PLLANSU95P
$235.00
2 Reviews
The support rings PLUS 95mm can be used with different brands telescopes with tube approximately 95mm in diameter. With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Takahashi FSQ85, Takahashi FS-78, Takahashi FC-100DF and DL. Like all the other...
Mount-Over-Fiber kit for...
  • New
Accessories for radio telescopes

Mount-Over-Fiber kit for SPIDER MarkII and INTREPID

MoF
$1,660.00
Be the first to review this product
Mount-over-Fiber kit for SPIDER MarkII radio telescopes allows to remotely control the tracking system from very long distances by replacing the network cable with a dedicated optical fiber that can be up to 2km long.
$125.00
Be the first to review this product
Adapter from M98 to M72 female for ESATTO 3,5" LP allows you to connect any camera or accessory with M72 male thread. Just thread this adapter to the M98 thread of the ESATTO 3,5" LP draw tube. This adapter adds no optical thickness.
$95.00
Be the first to review this product
By adding this adapter, you can connect the ESATTO 2" LP low profile robotic focuser directly onto the back of SC telescopes. This adapter threads directly to the back SC thread of EdgeHD 8" and C8 telescopes. Optical thickness is 2.5mm.
ALTO telescope cover motor

ALTO-3L adapter for OS RiDK 400

PL3700141
$495.00
Be the first to review this product
This adapter allows you to connect ALTO-3L telescope cover motor to the front part of the OS RiDK 400 telescope.
GIOTTO 255 with ALTO-2...
  • Pack
GIOTTO+ALTO bundles

GIOTTO 255 with ALTO-2 telescope cover motor

PLLGIOTTO255ALTO2
$1,090.00
Be the first to review this product
This bundle includes GIOTTO 255 Smart Flat Field Generator and ALTO-2 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
GIOTTO flat field generators

GIOTTO 220 Smart Flat Field Generator

PLLGIOTTO220
$435.00
Be the first to review this product
GIOTTO 220 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 220mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
Spare parts

Grey color bushing for SESTO SENSO 2

PL3600116E
$9.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
This grey color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 3.1mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.
Spare parts

WiFi antennas for EAGLE

PL3600087
$25.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
These WiFi antennas can be connected to the EAGLE control units, by using the sma connectors that are present on the EAGLE chassis. These antennas are included in the EAGLE's box and they provide 2 dBi gain. Compatible with all the EAGLE models, 2 antennas included in every set.