Close

You’re shopping from: United States of America

  • Pack
Big dovetail clamp Vixen+Losmandy...

FAST SHIPPING with express courier

Big dovetail clamp Vixen+Losmandy PLUS for HEQ5

PLLMORVLPB-HEQ5_

The big dovetail clamp Vixen+Losmandy PLUS for HEQ5 allows you to install, on the Skywatcher HEQ5 mount, telescopes with Vixen and Losmandy dovetail bars.

The HEQ5 mount can connect only Vixen type dovetail plates: with our big dovetail clamp Vixen+Losmandy PLUS for HEQ5 you can also connect the Losmandy type dovetail plates!


$180.00
MSRP

Composed of

Contact your local Dealer
 

The Skywatcher HEQ5 mount has only a Vixen type fitting, but thanks to our Losmandy and Vixen dovetail clamp, the user will be able to use both of them.  
Now you will no longer need to replace the plate of your optical tube, so your HEQ5 will be universal like the most expensive and higher payload mounts!

Big dovetail clamp Vixen+Losmandy PLUS for HEQ5

Our dovetail clamp, therefore suitable to medium loads, it's made from a full aluminum block T6061 and red anodized to resist weathering. The installation on the Skywatcher HEQ5 is done by replacing the original upper flange with a new flange ( supplied with the terminal ) that enables the installation of the Vixen Losmandy - large. The operation is very simple, just remove the original flange, acting on three small threaded dowels and entering our flange.

 

Big dovetail clamp Vixen+Losmandy PLUS for HEQ5

 

 

Losmandy® is registered trademark of Hollywood General Machining, Inc.

Reviews

No reviews

You might also like

Vixen style dovetail plate...
Dovetail bars

Vixen style dovetail plate 240mm PLUS

PLLVIX240P
$59.00
Be the first to review this product
The Vixen style dovetail plate 240mm PLUS is designed to let you install telescopes or cameras on mounts with Vixen type clamp or photographic heads with Arca Swiss type clamp. This Vixen plate is 240mm long and, not only it comes with central threaded holed and slots, but also threaded holes to connect to other PLUS mechanical components such as support...
View
Losmandy style dovetail...
Dovetail bars

Losmandy style dovetail plate 240mm PLUS

PLLLOS240P
$74.00
Be the first to review this product
The Losmandy style dovetail plate 240mm PLUS is designed to let you install your telescopes on mounts with this plate. This dovetail plate is 240mm long and is useful for installing medium dimensions telescopes (such as refractors up to 130mm and reflectors up to 200mm in diameter) on mounts with Losmandy plate (as the SkyWatcher AZ-EQ6, or EQ8). Like all...
View
Big Dovetail Clamp...
Dovetail clamps

Big Dovetail Clamp Vixen+Losmandy PLUS

PrimaLuceLab
PLLMORVLPB
$145.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

1 Reviews
The big dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance), or give the possibility to assemble the Losmandy...
View
EAGLE5 S computer for...
  • -$170.00
EAGLE

EAGLE5 S computer for telescopes and astrophotography

EAGLE5S
$1,525.00 $1,695.00
Be the first to review this product
EAGLE5 is the most advanced all-in-one computer for telescopes and astrophotography, that simplifies remote control and power of telescopes and that allows you to control the devices you want with the Windows software you prefer. Inside the unique PLUS aluminum housing designed to be easily installed on your telescope and simplify cable management, the...
View