Close

You’re shopping from: United States of America

ECCO

ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point (the temperature below which dew condenses).

3% more discount if you pay with bank transfer - insert product in cart to get discount

ECCO2, environmental...
ECCO

ECCO2, environmental computerized controller for EAGLE

ECCO2
$195.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
View
ECCO-NTC adapter for Dew...
ECCO

ECCO-NTC adapter for Dew Heater Rings

PL1000061
$115.00
Be the first to review this product
ECCO-NTC is the adapter that allows you to use a Celestron Dew Heater Ring with the ECCO2 environmental computerized controller. Dew Heater Rings differ from standard dew heater straps, as they utilize an NTC thermistor to measure temperature of SC or aplanatic SC telescopes corrector plate without the need for an external temperature probe. ECCO-NTC is...
View
Guide scope support for ECCO
ECCO

Guide scope support for ECCO

ECCOSUP
$79.00
Be the first to review this product
ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).
View
DX finder base
Optical finders

DX finder base

PLLBACEDX
$29.00
Be the first to review this product
DX finder base can be installed on many telescopes to let you install finder supports from many brands. The DX base provides 4 slots to allow mounting with 4 screws (not included), up to the M4, either with flat or round head. On the bottom side there is a double curvature to perfectly fit with various sizes focusers.
View
Temperature sensor for...
ECCO

Temperature sensor for ECCO, SESTO SENSO and ESATTO

SESTOSENSO-TEMP
$25.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it to record optics temperature for automatic power management of dew heaters connected to the EAGLE. When used with...
View
Guide rings support plate...
ECCO

Guide rings support plate for ECCO

ECCOSUP-PL
Be the first to review this product
The "Guide rings support plate for ECCO" allows you to install the "60mm CompactGuide scope with PLUS 80mm guide rings" (PLLCG60) on the ECCO on a standard Vixen style finder shoe. This way you can use the guide scope with an autoguide camera or also with an eyepiece as an optical finder.
View

PrimaLuceLab ADVANTAGES :

INNOVATIONS FOR ASTRONOMY

Improve your telescope with our instruments.

WAREHOUSE IN USA

You can order from your preferred dealer.

Need support? Call us (442) 218-4507