Close

You’re shopping from: United States of America

Best sellers

PLUS dovetail clamp with 1...
  • Pack
Dovetail clamps

PLUS dovetail clamp with 1 Kg counterweight

PLL-CONTRPLUS-M_
$103.00
Be the first to review this product
The dovetail clamp combined with the counterweight PLUS 1 kg , provides an excellent way to offset the unbalanced optical frames. It can be installed in front or rear to the optics on the support bar Vixen or Losmandy type. You can also install more weights to each other simply by screwing them to each other through the screws supplied as standard.
View
Adapter ESATTO 2" for...
ESATTO 2"

Adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f4 and f5

PL3600237
$165.00
Be the first to review this product
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 250 f4 and f5 reflector for astrophotography, this adapter allows you to connect ESATTO 2" to this telescope. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you...
View
Guide scope support for ECCO
ECCO

Guide scope support for ECCO

ECCOSUP
$79.00
Be the first to review this product
ECCO is completely metal built and, for this reason, it can also be used as a finder support by adding the optional "Finder support for ECCO". So you can install your finder or guide scope above ECCO instead of using guide rings (this is a perfect solution, for example, for small apochromatic refractors and very portable setups).
View
Big dovetail clamp...
  • Pack
Dovetail clamps

Big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5

PLLMORVLPB-AZEQ5_
$186.00
Be the first to review this product
The big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5 allow to install on the Skywatcher AZ-EQ5 mount telescopes with Vixen and Losmandy type dovetail bars. It includes both the big dovetail clamp Vixen+Losmandy PLUS and the adapter for the AZ-EQ5 type mount. Thus you will have a better connection than the original AZ-EQ5 offering greater stability and...
View
ESATTO 2" LP focuser with...
  • Pack
ESATTO 2" LP

ESATTO 2" LP focuser with ARCO 2" rotator

PLLEST2LPARCO2
$1,665.00
Be the first to review this product
This bundle includes the ESATTO 2" LP low profile focuser, the ARCO 2" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 54.2mm of thickness and 50.9mm of free aperture.
View
GIOTTO 150 with ALTO-1...
  • Pack
GIOTTO+ALTO bundles

GIOTTO 150 with ALTO-1 telescope cover motor

PLLGIOTTO150ALTO1
$810.00
Be the first to review this product
This bundle includes GIOTTO 150 Smart Flat Field Generator and ALTO-1 telescope cover motor, allowing you to use GIOTTO as a remotely controlled motorized cap!
View
GIOTTO 220 Smart Flat Field...
GIOTTO flat field generators

GIOTTO 220 Smart Flat Field Generator

PLLGIOTTO220
$435.00
Be the first to review this product
GIOTTO 220 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 220mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
View
Flexible bushing for SESTO...
Spare parts

Flexible bushing for SESTO SENSO 2

PL3600119
$19.00
Be the first to review this product
This flexible bushing connects the SESTO SENSO 2 motor to one of the red, black, blue, green, grey or yellow bushings for different focusers. This flexible bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This flexible bushing is not compatible with SESTO SENSO first generation.
View
105mm PLUS support rings
Support rings

105mm PLUS support rings

PLLANSU105P
$259.00
Be the first to review this product
The 105mm PLUS support rings are designed for acromatic and apochromatic telescope (or other telescopes brands with tube approximately 105mm diameter) to expand the possibilities of use. In this way, for example, you can install both above and below the optical tube our PLUS plates or even guide rings. Like all the other elements of the PLUS series, these...
View
Eagle-compatible power...
EAGLE-type power cables

Eagle-compatible power cable for accessories with cigarette plug - 30cm - 8A

PrimaLuceLab
PL1000055
$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 8A) of the instrument they are designed for. On the other side they have the plug with...
View
ARCO rotator port cable -...
Spare parts

ARCO rotator port cable - 690mm long

PL3600422
$12.00
Be the first to review this product
The ARCO rotator port cable - 690mm long is included in the ARCO package but you can also order it as spare part if needed. This cable connects rotator port of ARCO to ESATTO or SESTO SENSO 2. Since this is the longer cable provided within ARCO package, it's che cable we suggest to connect ARCO to SESTO SENSO 2.
View
GIOTTO 285 Smart Flat Field...
GIOTTO flat field generators

GIOTTO 285 Smart Flat Field Generator

PLLGIOTTO285
$565.00
Be the first to review this product
GIOTTO 285 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 285mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
View
ESATTO 3" focuser with ARCO...
  • Pack
ESATTO 3”

ESATTO 3" focuser with ARCO 3" rotator

PLLEST3ARCO3
$2,335.00
Be the first to review this product
This bundle includes the ESATTO 3" focuser, the ARCO 3" rotator and the adapter to connect them, allowing you to take remote control of focusing and rotation in a compact focuser with just 86.5mm of thickness and 76.3mm of free aperture.
View
Red color bushing for SESTO...
Spare parts

Red color bushing for SESTO SENSO 2

PrimaLuceLab
PL3600116A
$9.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
This red color bushing allows you to connect SESTO SENSO 2 motor shaft to focusers with 2.5mm diameter shaft. This bushing is included in the SESTO SENSO 2 box but you can also order this as spare part if needed. This red color bushing is not compatible with SESTO SENSO first generation.
View
Adapter ESATTO 2" for...
ESATTO 2"

Adapter ESATTO 2" for SkyWatcher/Orion Newton 200 f4 and f5

PL3600229
$165.00
Be the first to review this product
If you are searching for the most precise motorized focuser to use the SkyWatcher/Orion Newton 200 f4 and f5 reflectors for astrophotography, this adapter allows you to connect ESATTO 2" to these telescopes. With this adapter the focuser thickness is the same of the original focuser (excluded camera adapter or visual back for ESATTO) in order to allow you...
View
85mm PLUS support rings
Support rings

85mm PLUS support rings

PLLANSU85P
$215.00
Be the first to review this product
85mm PLUS support rings can be used with any brands telescopes (for example refractors 70mm-80mm diameter) with tube approximately 85mm in diameter. Adding these rings, you can broad the possibilities of use of this telescope as it becomes possible, for example, the installation also on other mounts or to install telescopes in parallel. Like all the other...
View
Eagle-compatible power...
EAGLE-type power cables

Eagle-compatible power cable for accessories with cigarette plug - 30cm - 3A

PrimaLuceLab
PL1000019
$39.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The Eagle control unit can directly power supply accessories with power cord with cigarette plug. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply, maximum current 3A) of the instrument they are designed for. On the other side they have the plug with screw to...
View
Eagle-compatible power Y...
EAGLE-type power cables

Eagle-compatible power Y cable for 8A port

PL1000048
$59.00
Be the first to review this product
This "Eagle-compatible power Y cable for 8A port" connects to 8A 12V power out port of the EAGLE and provides you 2 power out ports (with 8A style connector). Just consider that, if you connect 2 devices to the same cable, the maximum provided current  will be 8A (and not 16A).
View
Eagle-compatible power Y...
EAGLE-type power cables

Eagle-compatible power Y cable for 3A port

PL1000047
$59.00
Be the first to review this product
This "Eagle-compatible power Y cable for 3A port" connects to 3A 12V power out port of the EAGLE and provides you 2 power out ports (with 3A style connector). Just consider that, if you connect 2 devices to the same cable, the maximum provided current will be 3A (and not 6A).
View
Adapter from M60 to M54...
ESATTO 2" LP

Adapter from M60 to M54 with stop ring for ESATTO 2” LP

PL3600547
$125.00
Be the first to review this product
Adapter from M60 to M54 with stop ring for ESATTO 2" LP allows you to connect any camera or accessory with M54 female thread. Just thread this adapter to the M60 thread of the ESATTO 2" LP draw tube. Thanks to the M54 stop ring for ESATTO 2" LP you can also fix the camera at a precise angle in order to better frame your camera sensor at the desired...
View
3" visual back for ESATTO...
ESATTO 3”

3" visual back for ESATTO 3" and ARCO 3"

PL8410010
$85.00
Be the first to review this product
If you want to connect a camera with a 3" nosepiece to your ESATTO 3" or ARCO 3", just connect the 3" visual back to the M81 thread of ESATTO 3" or ARCO 3" . This adapter has an internal brass compression ring to avoid scratching the inserted nosepiece as well as 3 locking screws (120° separation) for a perfect fit, even for heavy cameras or accessories.
View
C82 pier for concrete base
  • Pack
Tripods and piers

C82 pier for concrete base

C82-C-B
$695.00
Be the first to review this product
When you want to install a telescope under a dome, the pier is preferable since not only it provides very good stability but it also needs for less space and it prevents the telescope installed on the mount touches the tripod. Using the pier, you can safely use your instrument! This pier can be used with optional adapters for EQ6 / EQ6-R / AZ-EQ6 / CGEM...
View
Eagle-compatible power...
EAGLE-type power cables

Eagle-compatible power cable for SkyWatcher EQ8 mounts - 115cm 8A

PrimaLuceLab
PL1000015
$45.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The Eagle control unit can directly power supply SkyWatcher mounts. We build appropriate 12V power supply cables with various lengths. The Eagle-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side they have the 8A plug with screw to prevent being disconnected accidentally...
View
T2-50,8mm photographic adapter
Photographic adapters

T2-50,8mm photographic adapter

PrimaLuceLab
PL3304226
$24.00

We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.

Be the first to review this product
The T2-50,8mm photographic adapter connects to all cameras and accessories with female T2 (M42x0,75) thread so you can insert camera into 50.8mm visual back. On the telescope side it has a 48mm thread to allow you to screw any 50.8mm diameter filter. Built entirely of metal and fitted with black anodizing, it has 39mm free aperture so it does not create...
View