INNOVATIONS FOR ASTRONOMY
Improve your telescope with our instruments.
WAREHOUSE IN USA
You can order from your preferred dealer.
ONLINE SUPPORT
Find the best solution in our SUPPORT section
New products
$3,034.00
Be the first to review this product
CMP-19 is the Windows 10 Pro computer to be installed on a standard 19″ rack and it’s the best solution to install RadioUniversePRO software and remotely control SPIDER radio telescopes. CMP-19 has the same form factor of all the other SPIDER instruments that can be installed on a rack.
$4,407.00
Be the first to review this product
RK19 is the rack for radio telescope that is designed to allow you install all the Radio2Space receivers, antenna control units and accessories that fit in a 19″ rack. RK19 has 24 units, it comes with a Power Distribution Unit (PDU) to let you connect (with remote on/off) up to 8 devices and 4 fans with temperature sensor to keep control on your devices...
$2,232.00
Be the first to review this product
Wind sensor for SPIDER MarkII radio telescopes allows to continuously read the wind speed for safety: this way, if the wind speed exceeds the safety speed, the antenna is automatically moved pointing the Zenith, in a safe position, thus reducing the wind load on the antenna.
$1,660.00
Be the first to review this product
Mount-over-Fiber kit for SPIDER MarkII radio telescopes allows to remotely control the tracking system from very long distances by replacing the network cable with a dedicated optical fiber that can be up to 2km long.
Accessories for radio telescopes
Radio-over-Fiber kit for SPIDER 500A MarkII radio telescope
RoF-SPIDER-5
$8,665.00
Be the first to review this product
Radio-over-Fiber kit for SPIDER 500A MarkII radio telescope allows you to have fiber optic cable connecting the antenna to the H142-PRO radio astronomy receiver in the control room, instead of the standard coaxial cables. This way you remove the normal gain loss because of cable length and you improve even more performances of your SPIDER 500A MarkII...
Featured products
$1,195.00
Be the first to review this product
ESATTO 3,5” LP is the most advanced yet affordable low profile robotic focuser specially designed for the most demanding astrophotography! At just 32mm of thickness, ESATTO 3,5” LP provides a large 90mm free aperture with 10mm of travel, impressive 10 kg of payload capacity and an astounding resolution of 0.01 microns per step! ESATTO 3,5” LP has been...
$675.00
We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.
2 Reviews
ESATTO is the new generation robotic focuser that includes motor and advanced electronics and you control with EAGLE or any Windows computer by connecting it to a USB port, or via WiFi by using the Virtual HandPad on your smartphone or tablet! The 2” version of the ESATTO 2" has 50.9mm free aperture, 15mm of draw tube travel, 5kg load capacity and...
$1,525.00
$1,695.00
Be the first to review this product
EAGLE5 is the most advanced all-in-one computer for telescopes and astrophotography, that simplifies remote control and power of telescopes and that allows you to control the devices you want with the Windows software you prefer.
Inside the unique PLUS aluminum housing designed to be easily installed on your telescope and simplify cable management, the...
$275.00
Be the first to review this product
GIOTTO 120 is the Smart Flat Field Generator we designed to help you capture flat calibration frames for telescopes with aperture up to 120mm. GIOTTO uses many LED lights at a color temperature similar to the Sun, a specially designed light diffuser and, thanks to the included thumbscrews, you can easily lock it in front of telescopes with external tube...
$695.00
We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.
Be the first to review this product
ARCO 2" is the new low profile ARC second resolution rOtator that, thanks to its incredible resolution of 1 arc second per step, is the most precise camera rotator and field de-rotator! The 2” version of ARCO has a thickness of only 20mm and a free aperture of 50.9mm. When used together with an equatorially mounted telescope, ARCO allows you to rotate the...
$195.00
We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.
Be the first to review this product
ECCO2 is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity and pressure around your telescope and the temperature of your lenses by calculating the dew point...
$2,995.00
Be the first to review this product
EAGLE5 XTM is our most powerful computer ever for telescopes and astrophotography with blazing-fast AMD Ryzen 3 5400U processor, Industrial Grade 32 GB fast DDR4 memory, and huge Industrial Grade 2TB SSD drive (NVMe). Thanks to dual LAN port, 10 USB ports (4x high speed USB 3.2 ports plus 6x USB 2.0 ports), new Inclinometer and Motion Detector sensors,...
$495.00
Be the first to review this product
ALTO-1 is the telescope cover motor we designed to let you use GIOTTO for sizes up to 220mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows...
$269.00
$299.00
We do not ship PrimaLuceLab products to USA, you can order to one of our USA dealers.
8 Reviews
SESTO SENSO 2 - The highly accurate, advanced, vibration free, robotic focusing motor for your telescope! Connect it to the USB port of your EAGLE or Windows® computer to electronically control focus while still allowing you to manually move your focuser by hand if needed. If you don’t want to focus using a computer, you can connect wirelessly from any...
Be the first to review this product
PLAY is the astrophotography software that allows you to record beautiful pictures of the night sky in the simplest way, with the telescope, mount and camera you prefer! Connect all your telescope devices to PLAY and start your exploration of the Universe: check the Planetarium sky chart to find astrophotography targets, visualise your field of view, and...
LATEST POSTS FROM OUR BLOG
Use PixInsight to process deep-sky images recorded with PLAYIn this article we show how to use PixInsight to process deep-sky objects images recorded with PLAY astrophotography software. In this tutorial we’re going to process an image of NGC6992 nebula captured with a 100mm apochromatic refractor telescope on AZ-EQ6 mount in alt-az mode, with ESATTO focuser, ARCO rotator, GIOTTO flat field generator, ALTO telescope covering motor and QHY268C cooled camera. The telescope was remotely controlled and powered with the EAGLE and we captured all the images by using PLAY.
PLAY, how to use SEQUENCER to start an image sequence acquisitionIn this article you can read how to use SEQUENCER to start an image sequence acquisition. Once you’re happy with the acquisition settings and the object framing, you can press the large PLAY button in the lower-right part of PLAY window and you will see a new popup window that will show you the Sequencer.
How to remotely control your SkyWatcher equatorial or alt-azi mount with PLAYPLAY astrophotography software allows you to control also SkyWatcher equatorial or alt-azi mount provided with ASCOM drivers. In this article we descrive how to connect SkyWatcher computerized equatorial or alt-azi mounts to EAGLE or standard Windows computer and how to use PLAY astrophotography software in order to remotely control them. Please note: in order to use PLAY to control SkyWatcher mounts, you have to use ASCOM Platform at least 6.6 version (mount’s ASCOM driver has to be tested with ASCOM 6.6) and you have to have at least ESATTO focuser, SESTO SENSO 2 focusing motor, GIOTTO flat field generator or ALTO telescope cover motor.